|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
| Product | Radar sensor |
| Working voltage | 7-28VDC |
| Working consumption | 1.2W |
| Detected | Person, car |
| Background threshold | Auto or manual |
| Sensitivity | adjustable |
| Detect distance | Max. 6m(adjustable) |
| Dimension | 105mm x 78mm x 26mm |
| Communication port | RS485, on and off signal |
| Dimension | 115x85x31.2mm |
| Material | ABS+PC |
| Protection | IP65 |
Main Features
24GHz Anti-collision don't need to cut the ground, the
installation is simple.
It can distinguish pedestrians and vehicles, with strong
anti-interference, safety and reliability.
Wide range of use, most of the road gates in the general market,
compatible with straight rod machines, fence machines, curved arms,
advertising gates, airborne gates.
Internal circuit adopts high quality electronic components, with
stable performance.
The Vehicle Detector is mainly used to detect the existence and
passing of vehicles.
Are you still troubled to install loop detector and loops with the below disadvantages?
1) Cutting ground-Waste time and not good looking;
2) Complex wiring-Messy and Difficult;
3) Mud road-Cannot fix the loop;
4) Cannot detect big truck, trailer or other vehicles with high-bed.
Why choose barrier radar detector?
1) Can replace loop detector completely; no wiring layout, save time and cost.
2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.
3) Work in range of 24-24.5Ghz without effects from any climatic environment.
4) Can effectively distinguish vehicles and humans to avoid any hitting.
5) Can be used for trigger detection, e.g. trigger camera to capture the picture.
6) Can be used to trigger the alarm in the warning zone.
7) Can record the traffic and no data is lost when power is off.
It adopts FMCW modulation mode, which can accurately detect people & vehicles, and it has high ability to
distinguish people & vehicles, so to achieve anti-hit function.
Trigger radar & Anti-hit radar
1) The trigger radar and the anti-smash radar should be installed perpendicular to the lane's direction. The anti-smash radar is installed on the cabinet below the barrier boom. The trigger radar is installed on the special bracket for the radar installation. The optimal height from the ground to the radar center is 0.6 meters.
2) The barrier's cabinet must be fixed firmly to avoid shaking when the barrier is working.
3) Within the detection area, there should be no obstacles other than the barrier boom, e.g. traffic cones, isolation bars, signs, etc..
4) Please update the radar background in time after the environment in the detecting area is changed.
( The above picture's ratio is 10:1. The lane width is 3 meters and the trigger distance is 4 meters)
5) Anti-smash Radar Detector Installation Diagram
