Charge free battery power supply Car Parking Lock device with
communication protocol
Advantage functions:
- Can be communicated with smart phone app bluetooth technology
- Can provide communication protocol to develop clients
Product Features:
- Code clearance: Keep pressing the built-in touch switch till there is frequent
blinking and alarm, the original code is cleared.
- External force alarm : The arm at vertical position, if front and rear direction
undertake a certain force, when the arm reaches a certain angle,
there will be alarm. When the external force is removed , the arm
will return back.
- Low power indication: When battery power drops to 5.0V, if user press the remote
control, the arm still action but with indicator light flashing and
intermittent sound alarm. Time for replace the batteries.
- Power shortage indication: When the battery voltage drops to 4.2V , the arm will
automatically low down, if user press the remote control, the arm
will not action, the indicator light flashes slowly with
intermittent sound alarm. Time for replace the batteries.
- Pressure Resistance: The parking lock can endure a rolling force of 200kg under the
falling status without being damaged.
- Self locking: When the parking lock is at horizontal and vertical status, no
one else can make permanent change on the status except the user.
- Anti-theft: The position of the foundation for parking lock and ground
installation will be protected by a large external cover. The cover
can only be opened by the user.
- Manual control: In situation of power outage or the parking lock fails, but need
to lower the arm, user can open the cover with the key and
dismantle the shaft screw of the putter and low down the arm.
- Sealing: The IP protection level is 67, which can fully prevent dust and
water from entering inside.
- Power: 4 pieces of D size alkaline batteries make it charge-free and
easy to replace. Under normal use, original battery can be used for
nearly one year.
- Power connection indication: When 6V power connected, indicator light will flash and with a
sound alarm.
- Code settings for remote controller:After power on, within 5 seconds, user must press the RISE and
DOWN button of the remote control separately. If the indication
light flashes twice and the sound alarm rang twice, the remote code
has been set.
Technical parameters:
| Type | remote control parking lock |
| Power | D size battery power supply |
RATED VOLTAGE | DC6V |
STANDBY CURRENT | ≤1mA |
WORKING CURRENT | ≤0.8A |
RISING TIME | ≤4s |
FALLING TIME | ≤3s |
HEIGHT AFTER RISING | 400mm |
HEIGHT AFTER FALLING | 86mm |
CONTROL DISTANCE | ≤20m |
ENVIRONMENT TEMPERATURE | -30°～+60° |
DIMENSIONS | 430mm×440mm×86mm |
GROSS WEIGHT | 10kg |
