Intelligent Car Parking Barrier IP68 with Recharge Champion Brand
The parking lock is widely used in car parking management in areas
like high-end residences, shopping malls, hotels, airports and
other commercial places.
The cabinet of the parking lock is coated with high-class varnish
with features of glossiness and fast color. The product has
attributes like beautiful and novel structure designing,
user-friendly, diversified functions, safe and durable operation.
4S TO 6S
REMOTE CONTROLLED DISTANCE
MAX BEARING WEIGHT
1. Energy-saving; the battery is a best product in China, power can
last for half a year.
2. Safe; the power connection is anti-disconnecting design in case
that the user misplaces the
battery causing short circuit; battery installation is easy.
3. Durable; the cabinet is made of die-casting Zinc alloy with high
quality, and the maximum
weight of load-bearing is 5 tons; the cabinet is coated with
varnish, being water-proof and
anti-rust in harsh weather. The sway arm is made of
fiber-reinforced nylon, and it will not
deform even after car crushing.
4. Hermetic; the cabinet is tightly closed, and Protection Grade is
IP68. It is waterproof and
dust-proof. It can be used broadly.
5. Intelligent self re-positioning; the external force could not
change the sway arm position when
it is vertical; when the sway arm is forced to a horizontal
position, it will re-position vertically,
unless the user uses remote control to put it horizontally.
6. Noise-free; bearing transmission design of the motor makes
almost zero noise. It is beneficial
for battery and motor longevity and lesser friction.
7. Burglarproof; the mounting bolts are placed inside of the
cabinet and without key, no one can
8. Installing friendly: four prepared holes at the bottom of the
cabinet makes it easy to install.
1, when there is no car in the parking stall, the parking lock will
rise up to its highest position
2, when there is a car in the parking stall, the parking lock will
fall down to its lowest position
3, if remote controller is needed, firstly you need to cut off the
power and wait for three seconds;
secondly you should plug in power again, when the red light is on,
press two buttons of controller
at the same time. At this moment, both red light and green light
will be on, after the red is off, you
can the remote controller
4, if you want to control the parking lock in the car, you need to
put it in the front of the
windscreen, and press the button for 1 or 2 seconds.