Jiangsu Longcheng Casting Machine Co., Ltd. |
|
Manual Operation Sandblasting Room for LPG Cylinders Surface Retexture
Sandblasting room /Sand peening room are mainly used for large
parts (including ships, bridges, aerospace, wind power tower,
petroleum machinery, mining machinery, etc.) or deal with very
expensive parts. Installed in the sandblasting room of the nozzle
manipulator can be part of the surface of automatic sand blasting,
automatic sandblasting difficult to reach the region can be
completed by hand sandblasting. This provides flexibility and
reduces the number of sandblasting operators required.
Through the gun on the workpiece surface impact, to achieve the
surface of the workpiece to oxide skin, burrs, welding slag, rust
and other clean-up, so as to achieve coating roughness of the
process and surface enhancement requirements. At the same time, the
system is equipped with sand material recycling, sorting and dust
removal device, automatic recycling and recycling of sand material
and environmental protection operations, is the most widely used
and common surface cleaning method.
Sandblasting room design can meet the special requirements of
customers, but also to achieve the most simple mode of operation.
Specifications of one customzied model
Model | PS6040 | |||
Inside size of cleaning chamber (mm) (L*W*H) | 6000 * 4000 * 4000, welded steel structure with rubber line plate inside | |||
Main door (mm) (W*H) | 3800 * 3800 | |||
Service door (mm) (W*H) | 1000 * 2000 | |||
Cleaning grade | GB8923-88 A-B Sa 2.5-3.0 | |||
Sand blasting system | Model | PG-900 | ||
Spray gun | Quantity | 2 sets | ||
Sand blasting pot | Model | PG-900 | ||
Quantity | 1 set | |||
Volume (m3) | 1 | |||
Protective clothing | Quantity | 2 sets | ||
Breathing device | Quantity | 2 sets | ||
Capacity of blasting (m2/h) | 10-30 | |||
Sand collecting and recovery system | Longitudinal screw conveyor | Quantity | 1 set | |
Conveying capacity (t/h) | 30 | |||
Power (kw) | 5.5 | |||
Transverse screw conveyor | Quantity | 1 set | ||
Conveying capacity (t/h) | 30 | |||
Power (kw) | 3 | |||
Elevator | Quantity | 1 set | ||
Elevating capacity (t/h) | 30 | |||
Power (kw) | 3 | |||
Separator | Quantity | 1 set | ||
Separating capacity (t/h) | 30 | |||
Storage hopper | Quantity | 1 set | ||
Holding capacity (t) | 8 | |||
Total power (kw) | 11.5 |
Features
1. Scientific simplification of equipment structure.
2. Easy to install.
3. Use a wide range of abrasives.
4. To ensure the safety of employees.
5. Environmental protection operations .