Active Member
|
[China]
Address: Room 602,Building 6,No.316,lianhua street,High-tech zone,Zhengzhou,China
Contact name:Alex Zhang
Henan LinkZone Fire Technology Co.,Ltd |
|
|
Automatic Fire Fighting Monitors Fire Protection Solutions
Advantages:
●365days uninterrupted video monitoring.
●360° horizontal rotate and 120° vertical rotate.
●High pressure,quick response ,long jet distance and large protection range.
●Infrared thermal imaging detecting technology ensure no miss alarming and no fault alarming.
●Applicable voltage range:AC 110V~240V.
●Multifunctions:Fire monitoring,Fire alarming and Fire extinguishing.
●Water saving.
●Remote control and automatically scanning.
How does an automatic fire water monitor work?
Our Automatic Fire Water Monitor discharge large volumes of suppression agent from a single fixed location, and at high pressure to give it an excellent range of coverage.The Quick Response Fire Fighting Monitor has built-in infrared thermal imaging detector, UV flame detector, closed circuit television camera. Real time dynamic flame location and laser corrector. The Automatic Fire Water Monitor works with the external UV flame detector to eliminate the detection blind area and increase early warning range.
When the Automatic Fire Water Monitor receives the fire early warning signal (UV or IR signal),it's
built-in IR flame detector will automatically rotate along
with the water monitor and lock the flame for 3 seconds, then
spray water to extinguish the fire. Otherwise, the water monitor
will consider it as a false alarm, and the Automatic Fire Water Monitor will reset automatically.The time spent from fire started to
fire targeted is less than 30 seconds.
Specifications:
| ZDMS0.6/5S-LZII | ZDMS0.6/10S-LZII | ZDMS0.8/20S-LZII | ZDMS0.9/30S-LZII | ZDMS0.8/40S-LZII | ZDMS0.8/50S-LZII | |
Working Voltage | DC36V | DC36V | DC24V | DC24V | DC24V | DC24V |
| Rated Pressure | 0.6MPa | 0.6MPa | 0.8MPa | 0.9MPa | 0.8MPa | 0.8MPa |
| Protection Radius | 20m | 28m | 42m | 50m | 52m | 55m |
| Rate of flow | 5L/s | 10L/s | 20L/s | 30L/s | 40L/s | 50L/s |
| Installation Height | 6~15m | 6~15m | 8~35m | 8~35m | 8~35m | 8~35m |
| Jet radius | ≤34m | ≤39m | ≤56m | ≤62m | ≤67m | ≤73m |
| Positioning time | ≤30s | ≤30s | ≤60s | ≤60s | ≤60s | ≤60s |
| Monitoring radius | 40m | 40m | 60m | 60m | 80m | 80m |
| Flange Connection | DN50 | DN50 | DN80 | DN80 | DN100 | DN100 |
Attention:
1.The side of cannon with label”this side to wall” must be faced to
wall when installed.
2.Video line connected from DVR to cannon directly.
3.Signal lines must connect to signal lines of cannon where it is
2m from cannon.
4.Operation panel installed near the exit and 1.5m from ground,and
from where operator can see all cannnons controlled by this
operation panel.
5.Pls take care when handling cannon as there is UV detector at the
bottom of cannon.The UV detetor is fragile.
6.Make sure there is no barrier around the cannon to stop the
cannon 360 degree rotate.
7.The ground lead of DVR,earth wire and Lightning protection wire
of control console need be connected to your ground lead.
Scope of applications:
Our Automatic Fire Water Monitor are wildly used in Industrial,commercial and residential fields.Such as airport, high-speed railway station, bus station, hotel atrium, museum, library, TV studio, gymnasium, science and technology museum, exhibition hall, convention center, theater, cinema, civic activity center, industrial plant, chemical plant, gas station, oil port,helicopter hangar, power plants, logistics centers, hospitals, large shopping malls, commercial complexes, colleges and universities, coal mines, warehouses and other places with large space.
FAQ:
Q1: Are you a manufacturer?
