WANGDA Machinery Factory |
|
JBG - 4 Fixed And Movable Casting Machine / Pulper Autoclave Aerated Concrete Block
Product Description
Casting machine is applicable for mixing the raw materials to make them well-proportioned and reacted with each other adequately, and pouring the mixed slurry into mould frame in due course
Casting process is divided into mobile and fixed-point cast two types of casting. Mobile mixer pouring is walking down to the material with a good mixer, while mixing while moving, mixing well after reaching mode bit aerated concrete slurry into the mold.
Fixed point in pouring the ingredients stand mixer sucked beneath the die to move to the next mixer,
mixing well to accept the mixer has been aerated concrete slurry, and then die and then move to the
designated location to complete their hair air hardening process.
The Performance Advantage:
1. Lightweight: Porosity achieve 70% to 85%, volume density is
generally 500 ~ 900kg/m3, as 1/5 of general concrete the 1/4of
clay, the 1/3 of hollow brick, and similar with wood can float in
water. It can reduce building weight, reduction in the cost of
integrated building.
2. Fireproof: Most of the major raw materials is inorganic
materials, so it has good fire resistance, and do not emit harmful
gases when meet fire. Fire 650 degrees, as a refractory material,
the thick up of 90mm walls can reach to 245 minutes fire
resistance, 300mm thick up wall can reach to 520 minutes fire
resistance.
3. Sound insulation: Due to a unique porous structure, so it has a
sound absorption capacity. The sound absorption capacity can reach
of 10mm thick wall up to 41 db.
4. Insulation: As the material inside has a large numbers of the
pores and porous, which has a good thermal insulation properties.
The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick.
Typically, the insulation effect of 20cm thick aerated concrete
wall is equivalent to 49cm thick solid brick walls ordinary.
5. Permeability: Result of material by the composition of many
independent small pores, the moisture absorption is slow, in the
volume of absorbent is 5 times of clay saturation do. When used in
the bathroom, the wall can be treated to interface directly paste
tiles.
6. Anti-seismic: The same building structure, improve the two
seismic than the brick level.
Pro-environment: Manufacturing, transportation, all use the process
of pollution, to protect arable land, saving energy, is one kind of
a green building material.
7. Durability: material strength is stability, in the specimens
tested after one year of atmospheric exposure; the intensity
increased by 25%, and remained stable after ten years.
8. Shortcut: it has good machinability, can be sawed, planed,
drilled, nailed, and available appropriate as bonding of adhesive
material, so create favorable conditions for building construction.
9. Cost-saving: An integrated lower cost than using more than 5% of
solid clay bricks, and can increase the usable area, greatly
enhance the utilization of floor space.
Basic Information
Condition: | New |
Type: | AAC casting machine |
Brick Raw Material: | Fly Ash |
Processing: | Brick Production Line |
Method: | Vacuum Extruder |
Automatic: | Yes |
Capacity: | 4 cubic meter, Large |
Place of Origin: | Henan, China (Mainland) |
Brand Name: | Wangda |
Model Number: | JBG-4 |
Power: | 13 kw |
Certification: | ISO |
Warranty: | 1 year |
After-sales Service Provided: | Overseas service center available |
Rotary speed: | High |
Quality: | Best |
Price: | Negotiable |
Business type: | Manufacturer |
Technical Date
Name | Unit | Technial date |
Volume of the mixer | m³ | 4 |
Shaft rotating speed | r/min | 600 |
Running | m/min | 15 |
Motor Power | kw | 13 |
For Sales
Pre-sale
1. Depending on customer's requirement, we insist on "making profit
at lowest investment" and gives best solution as per the customer’s
special demand.
2. Design the most reasonable project and maximum customers'
profit.
3. Provide engineers to scene to plan work site if the customer
needed.
4. Provide equipment list, design drawing, construction drawing,
equipment install drawing.
During-sale
1. Depend on scene, draw design drawing , construction drawing,
equipment install drawing, civil work detailed drawing for
references, operating manuals, maintenance video, etc
2. Manufacturing products strictly on contract while customer
constructing.
3. Production progress report each week with detailed description
and photos, including raw materials tables, process and deep
process record, testing data sheet, etc.
4. Testing all the equipments by witness of the customer ex-work,
delivery, customer acceptance.
After-sale
1. Provide engineer to work site guiding install, debugging and
commissioning.
2. Test equipment after installation, training operators for free,
remind notice in operating.
3. Regularly returning visit to the customers.
4. Within warranted period, we take charge of everything if any
quality problems. After the warranted period, we still focus on the
plant running and services.
5. Response customer’s questions within 1 working day, give
effective solutions within 3 working days, go into action with 5
working day.
FAQ
1. What's the raw material for producing bricks?
Clay,mud,gangue,shale etc.
2. How much land area for building a new brick plant?
It need above 20,000 square meters,the land area
relate with capacity
3. when you need our proposal and quotation,what you have to
mention in your inquiry.
Please provide daily capacity,the brick size and you
want to build a new brick plant or brick making machingery only. so
we can give the proposal and offer accordingly.
4. What's the Trade terms?
It can be EXW,FOB,CIF.
Product Show
Our Workshop
Delivery