5-Gallons PET Blowing Moulder Machine Power Saving Bottle Making
Using PET material, 5 gallon blow molding machine is especially
used to produce 3 gallon and 5 gallon bottles and is widely used to
produce any shape of plastic from PET with neck finishes from
15mm-200mm.. Those bottles are mainly used to contain pure drinking
water for office and family uses. Our 5 gallon bottle blower
machine is designed to produce high quality water drums at
very competitive prices.
- Perfect function with economic investment.
- Small size and compact construction with no space waste.
- Easy to operate and maintain ,operation by one person .
- Saving power and uneasy to worn out ,Adopting new double crank four
bars to lock mould, the cross fixed. Providing high pressure
- We can provide performs and various bottle& cap molds for 5
gallon and 3gallon bottles to meet customer's requirements.
Preform→Preform Storing Parts→Preform Heating
(Temperature Adjustment) →(Pull Stretch→Blow Air→ Release Air→ Blow
Pin and Mouth at same time→Close The Blow Mouth→Forming)→Finished
Before starting to manufacture the machine it is neccessory for us
to get the bottles samples according to which we can design the
preform and bottles mold. The shape of the PET bottles can be
various according to client. We can help to sculpt the bottles and
confirm with client before making bottle moulds.
(1) Air compressor is the air source for PET stretch blow molding
machine, carrying out the process of compressing air from
atmosphere to the required pressure.
(2) Air dryer is to remove the moisture from the compressed air and
lower temperature of the compressed air in the heat exchanger.
(3) Air filter is to clear up the impurities out of the compressed
air, like carbon-hydrogen, tiny dust and solid particles.
(4) Air tank is to receive and supply air for the machine as
Main Machine : Max volum of Product : 3-6 gallon
Output : 50-180
Weight of Main
Blower :2500 kg
Measurement of Main
Blower :2.8*0.72*2.16 m
|Neck Size Of Product||< 160 mm|
|Useful Area Of Mould Thickness||420*660 mm|
|Mould Thickness||350-420 mm|
|Mould Stroke||< 350mm|
|Clamping Force||80 kn|
|Working Pressure||≤10 kg/cm2|
|Blowing Air Pressure||≤40 kg/cm2|
|Power Of Main Blower||2 kw|
Preheater : Power : 16w
Weight : 800 kg
Measurement : 2200*750*1880 mm
1. Special design for PET Gallon Bottle up to 6 Gallon
2. Produce wide mouth jar up to 25 liter with neck size up to
3. Using Infrared reheat units to achieve uniform heating
throughout the wall of preform
4. Adopt special designed preform heating system to ensure the
optimal heating effect for 730g thick-wall preform
5. Special designed fan-cooling system in the heating channels to
keep the oven with constant temperature and ensure the preform can
be heated completely.
6. Water cooling system ensures the quality of preform neck.
7. Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle
8. Use advanced PLC control system with counting function and
time-control precision to 0.01second, and a use-friendly panel.
9. Equipped with special designed air storage units
10. Simple installation & startup adjustment
PACKING AND SHIPPING
Normally the inner package ,we will packed by the stretch film
,outpackage we will use the export woodencas if you have special
requirment of the package pls let us know in advance .
Mostly we send the goods to you by sea,as in this way the freight
is most reasonable ,if you need the goods urgently ,We can also
send by air .