Home Companies Qingdao Guihe Measurement & Control Technology Co., Ltd

TCM - 1 Diesel Fuel Tank Level Gauge , Stainless Steel Remote Fuel Oil Tank Gauge

Qingdao Guihe Measurement & Control Technology Co., Ltd
Active Member

Contact Us

[China] country

Address: No.207 Dongjia Road, Huangdao, Qingdao, China

Contact name:Sally Yu

Inquir Now

Qingdao Guihe Measurement & Control Technology Co., Ltd

TCM - 1 Diesel Fuel Tank Level Gauge , Stainless Steel Remote Fuel Oil Tank Gauge

Country/Region china
City & Province qingdao shandong
Categories Other Service Equipment
InquireNow

Product Details

TCM-1 Automatic diesel fuel tank oil level gauge, remote fuel management system for petrol station

 

 

Automatic tank gauging system 

 

Automatic Tank Gauge (ATG) system consists of SYW Magnetostrictive Probe and TCM-1 ATGs Smart Console, it is an electronic device, whose basic function is to monitor the fuel level in the tank. It can also tell the operator what is going on inside the tank. In other words, it gives us very important information like fuel level, volume and temperature, water level and volume, high and low fuel level warnings etc. There are different plans to satisfy different customers according to their effective demands.

 

Solution: SYW-A Probe + TCM-1 Control Console + Internet Remote Query

 

 

Magnetostrictive level transmitter (SYW-A )

 

● ATG probe consist of:

Fully enclosed magnetostrictive probe.

Electronic Pod using for data measuring and transforming.

Floater made according to the product.

 

● Probe Performance

 

ItemSYW-A
PurposeTo measure product level, water level and temperature
Titles of mediumGasoline, diesel, kerosene, ethanol , water etc.
State of mediumLiquid
Explosion-proof gradeExiaIIBT4 (Intrinsically safe)
Pressure range-0.02Mpa~0.6Mpa
CertificatePCEC Conformity Certificate of Explosion-proof
Temperature-40℃~70℃
Product Level Accuracy±0.3mm
Water Level Accuracy±0.3mm
Temperature Accuracy±0.2℃
Height Resolution0.023mm
Repeatability±0.1mm
Temperature EffectError<0.2mm
Vibration EffectError<0.5mm
Lowest Product Inactive Zone2.5'' floater-180mm
Lowest Water Inactive Zone2.5'' floater-25mm
Measured VariableProduct level, interface level and temperature of 5 sensors and average temperature
Measure Range600~4000mm
Method of CommunicationRS-485
Probe Material1Cr18Ni9Ti
Power Supply+24~26VDC
Protection Class of Probe CanisterIP67
Max Communication Distance1200m

 

 

 

Touch Control Console (TCM-1)

 

● It can monitor up to 1-12 tanks and monitor the delivery conditions.

● It can display product level, water level, temperature, volume, ullage.

● It enjoys a tank tilt compensation function.

● It can display dynamically the change of product level and water level with graphics in proportion, it features a 7 inch colored touch-screen console panel, and each interface displays 4 graphics.

● It features an audible and visual alarm function with front panel.

● It comes with two RS-232 serial interface communication ports to connect with different brand Center Console.

● There is an embedded printer in it to print inventory reports, delivery reports, leak reports and shift reports.

● It can calculate volume of product by multipoint, which can fully ensure the accuracy of volume of the product.

● After connected with Center Console though internet, it can provide information in long-distance for manager to arrange the inventory.

● It can monitor the oil pump according to the product level, which can avoid the product spilled and pumpdown..

● It can connect with flow-meter to display delivery information constantly.

 

Specification of ATG tank gauge console

 

PowerAC220V, 0.2A, 50/60HZ
Working temperature-20 to 70 ℃
Install locationPetrol station office
Display resolution800*600
Display size7’’ full color LCD
PortsRS232, RJ45
Monitor tanks1-12
Explosion proof grade[Ex ia Ga] II A
Sound-light alarmYes
Tank table

Yes, simulate/input/

upload

PrinterYes, external/built-in
ReportsYes, up to 1 year

 

 

internet check function:

 

After connect with internet, Users can check petrol station tank gauge information on mobile phone or PC anywhere anytime.

 

 

Preparation Before Installation

 

The following preparation should be down before the liquid level meter installation.

  • Vertical-pipe
  • Blind plate
  • Wiring RVVP-4*0.75 shied cable from tank farm to control room, galvanized pipe on the outside of the shied cable. The cable from tank farm to control room can not have a connector.
  • The part of the galvanized pipe exposed from the wall of manhole length about 100mm, its outer thread (G3/4) length of 25mm, using for connection with explosion-proof box.
ATG Installation
 
Packing:
 
 
 
Our service

 

1. Provide necessary conditions for the customers visiting factory.

2. Good quality with competitive price.

3. All products have been strictly Quality Checked before shipping.

4. Free repair within 12 months.

5. Great after-sale service and offer solution within 24 hours.

6.OEM is ok.

 

Hot Products

Automatic Tank Gauge System for Magnetic Liquid Level Probe , Fuel Tank Meter Product Description ...
Magnetostrictive Transmitter Automatic tank gauge ATG for petrol station sensor Magnetostrictive ...
Magnetostrictive level transmitter with Automatic tank gauge, tank monitoring system for gas station ...
Gas Station Management Automatic Atg Magnetostrictive Probe Tank Level Gauge Product Description ...
High Accuiracy Digital Fuel Tank Atgs Automatic Tank Gauges Product Description Touch control ...
Overfill Prevention Fuel Level Measuring Instruments Automatic Tank Gauge System ♦ Profiles Guihe ...