Active Member
|
[China]
Address: No.207 Dongjia Road, Huangdao, Qingdao, China
Contact name:Sally Yu
Qingdao Guihe Measurement & Control Technology Co., Ltd |
|
|
SYW-E leak detection sensor consists of piezoelectric crystal, oscillating circuit, rectifier circuit and microprocessor etc. Piezoelectric crystal and oscillating circuit generate square wave with a certain frequency, and the square wave frequency is the natural frequency of vibration of piezoelectric crystal, belonging to the physical property of sensor. When oscillator plate of sensor gets in touch with liquid, vibration frequency will change significantly; this frequency change is collected and perceived by microprocessor inside the shell, and the microprocessor and peripheral circuit judge that the contact liquid is oil or water according to the change of frequency, and hereby infer that inner leakage or outer leakage happens to double-compartment tank. This sensor is not disturbed by the liquid structure, turbulence, agitation, vibration and other circumstances, and not limited by the light, with impact resistance, which can adapt to more complex scene environment. In addition, compared with leak detection sensors with other principles, this sensor is featured by stronger anti-interference ability.
Technical Parameters
| Power Supply | 220VAC |
| Explosion-proof grade | ExiaIIBT4 |
| Alarm method | audible and visual alarm |
| Sensor size | according to the length of the tank |
| Temperature | .-40℃~+70℃ |
| Environment humidity | <85% |
| Accuracy | Accuracy |
| Response time | <2s |
| Pressure range | 80Kpa~110Kpa |
| Output mode | switch output |
| Blind size | DN50/80/100 |
| GH-SLI Console size | 300*180*113mm |
Product Features
Safety: Explosion-proof gradeis ExiaIIBT4 issued by PCEC. The sensor structure is 304 stainless.
Sensitive: the instrutment detect accuracy <3mm, response time <2s
Stability: frequency variation of piezoelectric transducer belong to physical attribute, without structure, light and other factors interference. It can adapt to the complex environment, and with great anti - interference performance.
Intelligent trouble diagnosis: alarm lamp will flash when anything goes wrong with sensor. Users can inform factory alarm lamp status so that technicians judge the faults and repair it.
Intelligent oil/water diagnosis: detecting water and oil between the two layers of double-deck tank,when there are lakegae between the two layer of tank, the SYW-E Sensor will detetect it.
Simple Installation:485 protocol bus standard, easy for installation. Can share the same wirewith level meter.
Reserve switch output port, can realize interlocking control after connect with other equipments.
Installation dimension of sensor
1. Flange dimension
Blind flange shall be equipped in strict line with “GB/T9123-2010 convex steel pipe blind flange” requirements.
| Nominal diameter | Nominal pressure Mpa | Outer diameter of blind flange (mm) | Center circle diameter of bolt hole (mm) | Bolt hole diameter (mm) |
| DN50 | 1.6 | 165 | 125 | 18 |
| DN80 | 1.6 | 200 | 160 | 18 |
| DN100 | 1.6 | 220 | 180 | 18 |
1. Provide necessary conditions for the customers visiting factory.
2. Good quality with competitive price.
3. All products have been strictly Quality Checked before shipping.
4. Free repair within 12 months.
5. Great after-sale service and offer solution within 24 hours.
6.OEM is ok.
Qingdao Guihe Measurement & Control Technology Co., Ltd was founded in 2002, is a professional manufacturer of petroleum equipment. We specialized in producing Magnetostrictive liquid level meter (tank gauging system), Underground fuel tank volume table calibration system, Double layer tank leakage detector, Double layer pipeline leakage detector, Tank car liquid level meter, Human body electrostatic discharge alarm. We also providing different customers with personalized solutions.
