Electric Thermostatic Drying Oven Hot Air Circulation Steam Pressure 0.2-0.8Mpa

Hot Air Circulation Fish Drying Oven Electric Thermostatic Blast Drying Oven

Product description

Drying Oven is a domestically-made product. It has been carefully designed and updated by our company to reach the international advanced level. The equipment is a box type, and can be assembled and disassembled. It is divided into CT type (centrifugal fan) CT-C (axis). The series of products of the flow fan, which uses steam and electricity as a heat source, is heated by a heater, and a large amount of hot air is circulated in the box, and is replenished from the air inlet through the fresh air to enter the box, and then continuously discharged from the moisture discharge port. This increases the heat transfer effect and gradually reduces the moisture content of the material in the tank. The oven produced by our company is equipped with low noise, high temperature axial flow fan and automatic temperature control system. The whole circulation system is completely enclosed, which improves the thermal efficiency of the oven from 3-7% of the traditional drying room to the current 35-40%. Up to 70%

Drying Oven is a tray type intermittent general drying device suitable for surface width, and is widely used for dehumidification of industrial raw materials or products such as pharmaceutical, chemical, food, light industry and the like. For example: drying of raw materials, Chinese herbal medicines, powders, granules, crude drugs, pharmaceutical bottles, pigments, dyes, dehydrated vegetables, food, plastic resins, electrical components, paper, leather, wool, salt, catalysts, etc.

Features
1. Most of the hot air circulates in the tank, and the heat efficiency is high. Energy saving.
2. Using forced ventilation, the box is equipped with adjustable air distribution plate, the material is evenly dried, and the heat source can be steam, hot water, electricity, far infrared, and widely used.
3. The whole machine has low noise, balanced operation, temperature control and easy installation.
4. Wide range of applications, can dry a variety of materials, is a general drying equipment.
5. The heat source can be steam, heat transfer oil, hot water, electricity, far infrared, etc., and it is widely used.
6. The temperature range is large, according to user requirements, up to normal temperature to 350 ° C
7. The whole machine has low noise, balanced operation, temperature control, and convenient installation and maintenance.