Active Member
|
[China]
Address: 1708#, No. 1 building, Lane 2742, Pudong Avenue Road, Pudong, Shanghai
Contact name:Mrs. Lotus
Higee Machinery (Shanghai) Co.,Ltd |
|
|
Cosmetic automatic spray can aerosol filling machine round can cup
capping packing machine with MITSUBISHI PLC
Feature:
Specification:
| filling volume | 50-750ml |
| Filling accuracy | ≤±1% |
| Inflation Accuracy | ≤±1% |
| Production Capacity/filling speed | 2400-3600 cans/hr (40-60cans/min) |
| Required labor per shift | 4-5workers |
| Working Pressure | 0.6-0.8Mpa |
| Maximum Air Consumption | 3m2/min |
| Applicable Aerosol Can Diameter | 35-65mm |
| Applicable Aerosol Can Height | 80-330mm |
Configuration:
Electronic control system part
The electronic components like PLC and transducer are from
Mitsubishi, Siemens, Omron, etc., The pneumatic devices are also
from international famous brand.
Main electric brand
Touch screen: Weinview or Siemens
PLC program controller: Mitsubishi or Siemens
Inverter: Mitsubishi or Siemens
Photoelectrical controller: Omron or Autonics
Proximity switch: Omron
Other electrical components: Schneider
Pneumatic component: Airtac or SMC or Festo
Water pump: CNP or Grundfos
Main motor: SL or ABB or SEW
Bearing: Harbin or Igus
Main parts:
 | Feeding parts Worker putting bottles on the Bottles feeding table, then the table will feed the bottles to the conveyor belt. |
Filling parts: Tt‘s’ provided with a sealing head, 2 gas filling heads, 2 booster pumps, as well a gas storage tank with an energy accumulator; It has the feature that guiding devices are provided at both sealing head and inflating heads. Reliable sealing quality, little leakage of gas inflating. Advise: build a filling room, to enhance security |  |
 | Inserting and capping Automatic cap sorting, feeding and capping system for different sizes caps. This parts can be make according to client's caps' shapes. and it can be 1/2/3... heads capping. |
Labeling partsIt is for stick label. Automatic labeling round bottles, square bottles or other types of
bottles. It can be one side labeling, two side labeling and so one. |  |
Service:
1. System control: The main machines including the liquid filler and the sealing and gas filling are completely pneumatic controlled.
2. Safety guarantee: Ex motors are applied for cans arranging machine and the feeding conveyor; the power supply cable is going through PVC pipes and anti-explosion junction boxes, connected by anti-explosion switch; the casing is earthed to prevent electrostatic; both liquid filler and inflating machine are protected by cabinet (stainless steel frame with 4mm annealed glass) to prevent injury due to cans blasting. Advise: built the filling room specifically for the gas charging machine, to enhance security and reduce the risk of explosion.
3. Service Guarantee:
Providing easy-broken parts and accessory free of charge within one year, if need engineer for installation, test and training, the buyer should pay all the cost, and should buy local life insurance for our engineers and pay them USD100/day.
