Electric Hot Juice Filling Machine / Juice Glass Bottle Production
This series of machines integrate washing, filling and capping in
one unit, can be used for different kinds of fruit juices and tea
hot drink production. With only a few parts changed, the machine
can also be used for mineral water filling. The advanced
micro-negative pressure filling technology is used in this machine
to make the filling is quick, steady and accurate.
The beverage feedback system is well designed, the gas can be fed
back separately, has no contact with beverage reduce the second
time pollution and oxidation. This machine can meet all the
technical requirements for hot drink filling below 95°c. All
filling valves and beverage conducting pipes can be cleaned. And
the automatic washing interface CIP is designed in the machine
The RO water washing device is used to wash the bottle mouth to
keep mould away from the bottle mouth. Magnetic torque is used for
screw capping, the power of screw capping can be adjusted stepless.
It can use constant power to screw capping the plastic caps. The
human machine interface is the touch screen. The most advanced PLC
control and frequency changing technologies are used in this
The cap feeding system can be controlled automatically, the filling
temperature can be detected automatically. Alarm system for the
over heat of the beverage. The filling will be stopped when the
beverage temperature is too low and the beverage will flow back.
When no bottles and caps are available, the machine will be in
waiting state, and no caps will be applied.
- Integrated washing, filling, capping in one unit to realize
automatic juice filling.
- Washing part: There is enough water pressure to clean bottles.
And the washing water is from the RO system, it is purified water.
- Filling part: Adopted micro-negative pressure filling, and
filling speed is quick, steady and accurate.
- Capping part: There is a set of automatic lid arranging device to
drop into cap rail to make accurate capping. The capping system
will automatic delete the opposite caps.
- Suitable for producing large capacity production.
- Hot filling machine is adopted return-flow system to keep the
- Juice filling machine is equipped a set of CIP system for washing
pipes after the daily working.
- The machine is controlled by PLC with touch screen. The language
can be chosen in Chinese, English and other language. Usually is
- The material of washing, filling and capping is SUS 304 which can
be anti-corrosion, rust prevention and long life span.
|Bottle Height||150-310 mm|
|Cap Size||28mm and 30mm PE Standard Caps|
|Air Consumption||500 L/min|
|Gas Consumption||0.4 m3/min|