Active Member
|
[China]
Contact name:
Changzhou Taisheng Machinery Equipment Co.,Ltd. |
|
|
Dustless Vacuum Sand Blast Machine Removing Rust And Paint From Ship Bridge
Working principle
Vacuum, or dust free blasting is ideal for spot repairs, and has high demand on the environment which should be dust free and abrasive pollution is prohibited.
The blasting process is happened in a sealed chamber by the brush head, curve or flat. Dust and abrasives are immediately vacuumed by a powerful suction fan. The used abrasives are recycled to the separator and silo, the dust is collector by the cartridge filter. TS machinery vacuum blasting is a safe blasting solution for confined or critical areas (with a lower working speed compared to “open” blasting).
Apply for ship, oil pipe, bridge and so on.
Specification
| Model | TS-150L |
| Size | 1800×980×1840(L*W*H) |
| Weight | About 400kg |
| Voltage | 380V ±10% 50HZ three phase |
| The dia of nozzle | 6mm |
| Working pressure | 4-7bar |
| Working radius | 20m |
| Working efficiency | 1-3m²/h |
| Working type | Automatic recycle type |
| Air consumption | 2-3m³/min(22kw air compressor) |
| Fan power | 1x5.5kw |
| Cleaning level | Sa2.5-3 |
| Roughness | 20-70μm |
| Usable abrasive | Bearing steel grit G50 |
Features
Use vacuum blasting machine can avoid the environmental pollution of dust and the danger of workers’ healthy. The difference between vacuum blasting machine and traditional portable blasting pot is recycle system. When the machine is blasting, and it is recycling at the same time. We use special brush head, they are fit all (flat, cornered, radius) surfaces. The special brush head can recycle the blasted abrasive and dust, they are recycled into the separator. The abrasive is fell into the pressure tank and the dust is absorbed into the dust collector. The dust collector is automatic filter cleaning system,easy disposal of collected dust in a plastic bag.
This machine couldn’t occupy ventilation and special site(except the special condition). The total unit(including fan and dust collector) can be movable easily. It can save operating area and cost.
Equipped with adjust air valve, which can adjust intake air.
Equipped with special abrasive control valve, it can adjust the air flow and sand flow evenly. So we can get the suitable rate of air and abrasive, improve the working efficiency and quality.
Equipped with automatic filter cleaning system, easy operation and saver time and strength.
Reliable main machine parts, long lifetime and easy maintenance.
Brushes
You can use it by hand
or mounted on blasting gun rack like this
Package
