NB-320 Hardcover School Notebook advanced Catalog Directory Index Cutting Machine

NB-320 School Notebook Corner Cutting Catalog Index Cutting Corner Machine

Details of the Catalog Index CuttingMachine

NB-320 catalog corner cutting machine is a special equipment for paper corner cutting in the printing industry.

It has the advantages of high efficiency, easy adjustment, and safe use, and is widely used in factories and schools, other printing industries The shape and structure are shown below:

Installation and test run:

The placement of the machine must be balanced, and then press the front of the machine counterclockwise (as shown in Figure)

2). The movable cover (1) rotates and passes through the groove of the stopper (2) to the stopper pin (3). When the movable cover (1) presses down the switch contacts under the slot of the stopper (2), the power supply of the whole machine is cut break Insert the handle (random accessories) into the shaft head in the hole, and the machine can be operated manually move.

lf there is no abnormality, put back the movable cover (1) (must be put back), otherwise the machine will unable to start.

The one-time adjustment of this machine is completed at the factory, you need to adjust it during use, please press the following

4. Adjustment: The method is carried out.

4.1, Adjustment of the upper blade: (as shown in Figure 3)

1. Sliding board «

2. Locking screws

3. Adjusting screws

4. Screw one

Figure 3)

The upper blade of this machine and the skateboard are connected by a screw as a whole, and the best position of the upper blade .The position should be such that the highest position of the upper blade edge intersects the lower blade edge when itis at its lower limit position. Wrong 1-2mm, when adjusting, remove the locking screw (2) and turn the adjusting screw (3), You can move the upper blade up or down (the rotation of the adjustment screw is 90°,

one stop), Then install the locking screw (2) and tighten it.

4.2. Adjustment of the height of the paper bar: (as shown in Figure 4)

Loosen the upper screw (4) of the slider (2) and move the paper bar (3) up and down to satisfaction’

The position, (The best position of the paper pole: when the paper pole is in the lower pole position, it should be in 2-3mm below the blade of the lower blade), then tighten the screws (4)

4.3. Adjustment of workbench motion indexing

Supplier: Nanbo, located in China.

Smallest order quantity: 1 piece

Application: Industrial PVC spiral coil binding

Machine series: Binding machine

The binding speed of this machine is 500 cycles to 700 cycles per hour, if this speed meets your binding requirement, then you can take this spiral coil machine directly and use it in your factory. This working speed is high and can help improve your working efficiency, it is worth trying. 

This binding machine is made by our own factory, so we can ensure that you can get a high-quality plastic PVC spiral coil binding machine at a relatively competitive offer. You can compare the price from any Chinese supplier, then come back to us. 

 
The goods we can supply are listed below. 
 
Welcome to place the order! Look forward to establishing a long-term business relationship with you and your company!