|
[China]
Trade Verify
Address: 18F ZHONGXIN BANK BUILDING HONGQIHEGOU CHONGQING CHINA
Contact name:Wang
Chongqing Big Science & Technology Development Co., Ltd. |
|
Verified Suppliers
|
|
|
Haise Van for assembly for Joint venture assembly plant
| Quotation for Haise Series | |||||||||||
| EX-WORK PRICE | |||||||||||
| USD 9,280 | USD 9,580 | USD 11,180 | USD 11,480 | ||||||||
| Engine | |||||||||||
| Model | Gasoline Engine:JM491Q-ME(EFI) | Deisel Engine:BJ493Q(Without turbocharge) | |||||||||
| Displacement:2237 cc | (same as 4JB1T) | ||||||||||
| Power Rate:76hp/ 4600rpm | Displacement:2771 cc | ||||||||||
| Torque:193N.m/ 2000-2600 rpm | Power Rate:68hp/ 3600rpm | ||||||||||
| Torque:202N.m/ ≤2300rpm | |||||||||||
| Type | 4-cylinder, water-cooled, EFI, Gasoline | Vertical, in-line, forced water cooling, pressure charging, four stroke, direct injection combustion chamber, Diesel | |||||||||
| Compression ratio | 8.8:1 | 18.2:1 | |||||||||
| Max. Power (hp/rpm) | 76/4600 | 68/3600 | |||||||||
| Max. torque (N.m/rpm) | 193/2000-2600 | 202/≤2300 | |||||||||
| Fuel consumption (L/100km) | 9.8 | 6.98 | |||||||||
| Emission standard | Euro II | ||||||||||
| Specifications | |||||||||||
| Overall dimension (mm) | Length | 4900 | 5200 | 4900 | 5200 | ||||||
| Width | 1700 | ||||||||||
| Height | 1980(Standard) / 2075 (Semi-high) / 2275 (High) | ||||||||||
| Wheel base (mm) | 2590 | 2890 | 2590 | 2890 | |||||||
| Tread, front/rear (mm) | 1450/1430 | ||||||||||
| Min. ground clearance (mm) | 165 | ||||||||||
| Curb vehicle weight (kg) | 1620 | ||||||||||
| Gross vehicle weight (kg) | 2420 | ||||||||||
| Seating capacity (persons) | 14-15 seats | ||||||||||
| Fuel tank volume (L) | 70 | ||||||||||
| Tires | 195R15 | ||||||||||
| Steering | Rack and Pinion | ||||||||||
| Suspension | Front | Independent Suspension by double beams with torsion bar spring | |||||||||
| Rear | Leaf springs | ||||||||||
| Braking | Front | Disc type | |||||||||
| Rear | Drums type Hydraulic braking system with vacuum booster | ||||||||||
| Clutch type | Single plate, dry type diaphragm spring with tensional vibration damper | ||||||||||
| Gearbox | 5 speed manual | ||||||||||
| Max. gradability (%) | ≥32 | ||||||||||
| Fetures | |||||||||||
| Standard | Optional | ||||||||||
| White color, | 4JB1 Diesel engine with turbo +USD250 | ||||||||||
| AM/FM stereo cassette player with 4 speakers | Semi-high roof +USD200 | ||||||||||
| Front heater | High roof +USD400 | ||||||||||
| Steel rim | Front A/C +USD450 | ||||||||||
| Seat belt for driver & co-driver | Front and rear A/C +USD700 | ||||||||||
| Soften steering | Power steering +USD300 | ||||||||||
| Tire 195R15 | Power windows +USD80 | ||||||||||
| 15 seats | |||||||||||
| FM,AM radio/cassette player | Curtain +USD50 | ||||||||||
| Single CD +USD60 | |||||||||||
| DVD + Reverse image +USD180 | |||||||||||
| New version floor +USD90 | |||||||||||
| New style dashboard +USD150 | |||||||||||
| Bilateral air duct for front and rear A/C +USD140 | |||||||||||
| Central door locks with handle +USD150 | |||||||||||
| Aluminum rim +USD190 | |||||||||||
| Rear wiper & washer +USD90 | |||||||||||
| Back ground mirror +USD40 | |||||||||||
| Seat belts for all passengers(12 seats) +USD50 | |||||||||||
| Adjustable steering wheel +USD70 | |||||||||||
| Cherry wood interior +USD70 | |||||||||||
| Chrome rub strips +USD40 | |||||||||||
| Power outside mirrors +USD80 | |||||||||||
| Silver/golden/red/blue/green color +USD300 | |||||||||||
| False Bilateral air duct for semi-high and high roof +USD90 | |||||||||||
we need your full understanding that to sell the vehicle or equipment to you is not our main purpose , we are mainly seeking partners for assembly plants as a joint venture globally
Explain why we arrange joint venture plant’s share structure:
"65% is held by local shareholders, while 35% is invested by our China auto manufacturer”
1, local shareholders, holding 65% share, have higher business enthusiasm, and this business mode is much better for the development of the plant;
2, local shareholders, holding 65% share, can take more support from their local government, Bank and consumers, and the factory will be recognized as national industry;
3, local shareholders holding 65% share, the domestic industrial enterprises are more likely to obtain the government's preferential policies for industrial development;
4, local shareholders, holding 65% share, can operate various complicated social relations easier and better, which is conducive to the development of the enterprise.
Our preference for joint venture partners:
We prefer to work with capitalists, industrialists and entrepreneurs, rather than cooperating with "landlords", and never accept the "cooperation mode of landlords".The so-called “Cooperation Mode of Landlord”, that is, the landlord owns land, and lives his life by collecting land rent or exploiting peasants. Those, who only provide the land or workshop building, don't work and contribute any working capital, just rely on exploitation of the lessee, are called the landlords. The main way for the landlords to exploit is to collect rent.
As a local partner, if you only provide the land, plant and/or production license, and the rest of funds, equipment, management and others are all provided by the Chinese party, it is just like local landlords to collect profits without any other investment. So, sorry, you are not the partner we are looking for. We like to collaborate with industrialists, capitalists and entrepreneurs, those who have been or are being engaged in industry, with full of experiences, are more suitable for becoming our cooperators. Our cooperation principle is “working together to be bigger and stronger, and to achieve a win-win situation.”
My friend,in order to make our project go well and smoothly, pls read below :
Partner requirements of cooperation or joint venture term:
1.1, Your self workshop: you had have 5000-8000 square meter
workshop at least, and over 15000-25000 square meters industrial
land.
1.2, Your-self Cash:
have some necessary economic strength, investment capacity must
over two million USD.(don't include land, workshop value)
1.3, Market channel: have car sales channel (sales network) or car
garage remanufacturing second-hand car, or with the car related
businesses.
1.4, Your country Nice Import tariff policy: Your country import
tariff policy very important, gap of import tariff between auto
spare part CKD (completely knocked down) term and CBU (complete built unit) shall be at least
30-35%; for example, import tariff on CBU term is 35%, CKD term
must be 5%
or free.This term is most important factor for setting up an assembly plant in local. if CBU with CKD is almost same,the auto plant will
have not profit space.
our investment :
production line design + technology support + staff training + equipment installing&maintenance +management guidance + welding line + general assembly line
If you can meet the above mentioned criteria, let’s continue to talk further. Thank you.
