|
[China]
Trade Verify
Address: Floor 12, Building A, Rd Jiangshi, Quanju High-Tech Industry Park, Guangming District, Shenzhen, Guangdong Province, China
Contact name:Wave Luo
Shenzhen Atnj Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2 Watt Gain 85dB GSM Mobile Signal Booster For 2G Voice Call Network
2 Watt GSM Mobile Signal Booster Repeater Amplifier for calling 2G voice
Model No :AS-MS-G
With ALC AGC Functionr
Can control gain automatically. Avoid base station interference
(Band 8) 900MHz -- Uplink frequency: 890-915MHz/Downlink frequency
: 935-960MHz
Network support : 2G Voice
Gain :85±2dB
Output power : 2 watt .
Power Supply :AC110V～220V;DC+5V/2A .
Connector Type: N-F
Wide Range .
Single Band Repeater with AGC/MGC | ||||
Model | AS-MS-G | |||
Frenquecy Range | UplinK:890~915MHz Downlink:935~960MHz | |||
Working System | Band8 GSM 900MHz | |||
Gain | 85±2dB | |||
Device Output Power | 27--30dBm | |||
Bandwidth | Wide Range | |||
Ripple in Band | ≤4dB | |||
Noise Figure @ Max.Gain | ≤6dB | |||
V.S.W.R | ≤2dB | |||
MTBF | >50000Hours | |||
Power Supply | AC110V～220V;DC+5V/2A | |||
Power Comsumption | <20W | |||
Impedance Matching | 50ohm | |||
Mechanical Specification | ||||
RF Connector | SMA/F | |||
Cooling | Heatsink Convection Cooling | |||
Dimension | 170*130*26(mm) | |||
Net Weight | 0.35KG | |||
Installation Type | Wall Installation or Desk | |||
Environment Conditions | IP40 | |||
Origin | Shenzhen | |||
Operating Temperature | -10°C~55°C | |||
Further detail pls click here for downloading the products specification:
GSM 900MHz AT003 Signal Repeater.pdf
Selling Point
1. Intelligent to guide the installation with LCD
2. Real time display the signal strength.
3. Automatic dormancy when no user make the calling
4. Automatic alarm when installation mistake and provide the
according solution
5. Automatic adjust the system gain to avoid the repeater
self-excitation
6. Initiative reminding when the device was damaged.
FAQ:
1. Are you trading company or manufacturer ? Could I use our own
logo and label?
We are factory, with trading service. We provide OEM/OEM service.
2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1
for normal products.
3. Is it easy to set up your items?
Yes. We have a user manual and support technical support 24/7.
4. Can this mobile signal repeater create a signal where there is no cell signal before?
The mobile signal repeater cannot produce a signal, only amplify a weak one.
5. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
