|
[China]
Trade Verify
Address: Floor 12, Building A, Rd Jiangshi, Quanju High-Tech Industry Park, Guangming District, Shenzhen, Guangdong Province, China
Contact name:Wave Luo
Shenzhen Atnj Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2G 3G 4G Wireless Cell Phone Booster Dual Output 900MHz 1800MHz
Dual Output 900/1800MHz mobile phone repeater 2G 3G 4G wireless cell phone booster
General
The 900+1800MHz Pico Repeater provides an affordable solution to
solve the indoor signal coverage problems due to signal fading and
attenuation caused by architecture obstacles. And its easy
installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It
picks up the strongest signal from BTS via the Donor Antenna,
linearly amplifies the signal and then retransmits it via the
Indoor Signal Distribution System to the weak/blind coverage area.
And the mobile signal is also amplified and retransmitted to the
BTS via the opposite direction.
Technical Specifications
Specifications | Parameters | |
Frequency Range (Customers to Choose) | Uplink | 890-915MHz,1710-1785MHz |
Downlink | 935-960MHz,1805-1880MHz | |
Frequency Bandwidth | 25MHz&75MHz | |
Booster Gain | 67±3dB | |
Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step | |
Auto Gain Control | 20dB Min. | |
Output Power(Customers to Choose) | 17±3dBm | |
Spurious Emission | ≤ -15dBm/30kHz | |
9kHz~1GHz: ≤ -36dBm/30kHz | ||
1GHz~12.75GHz: ≤ -30dBm/30kHz | ||
Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) | |
In-band Ripple | ≤ 3dB | |
VSWR | <= 2 | |
I/O Impedance | 50 Ω | |
Noise Figure | ≤ 5dB | |
System Delay | ≤ 5μs | |
RF Connector(Customers to Choose) | N(Female) | |
Operating Temperature | Operation: - 10°C ~ + 55°C / Storage: -20°C ~ +60°C | |
Power Supply | AC 220V/ DC5V/2A power adapter) | |
Dimensions | 165*130*40 (mm) | |
Packing Weight | ≤3.5 kg(Net) | |
Alarm Monitoring System | Alarm for uplink self-oscillation | |
Intelligent LCD Guide | Done | |
Further detail pls click here for downloading the products specification:
900+1800MHz A032 mobile signal repeater.pdf
Selling Point
1. Intelligent to guide the installation with LCD
2. Real time display the signal strength.
3. Automatic dormancy when no user make the calling
4. Automatic alarm when installation mistake and provide the
according solution
5. Automatic adjust the system gain to avoid the repeater
self-excitation
6. Initiative reminding when the device was damaged.
Warranty
● Please note that we always check and test the product twice before shipping and pack them well as far as possibel.If the product is broken at receiving,please contact us,we would resend you a new one.
● Three years gaurantee period for our booster,it is ioly 3 months for thr accessories.If the booster have any problems, please show us an video or some photos of your complete installation, we will help you. Please do not open dispute or leave negative feedback before contact us.we will reply you within 24 hours,except holiday.
FAQ:
1. Are you trading company or manufacturer ? Could I use our own logo and label?
We are factory, with trading service. We provide OEM/OEM service.
2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1
for normal products.
3. Is it easy to set up your items?
Yes. We have a user manual and support technical support 24/7.
4. What's your device lifespan?
Normally our device can be used 5-10 years.
5. How many square meters can be covered?
For different models, the covered square meters are different.
