Active Member
|
[China]
Address: SPA Centre, 53-55 Lockhart Road, Wanchai, HongKong
Contact name:Mina
JIANGSU SAKIA TEC LIMITED |
|
|
Furnace flame monitoring endscope camera with water and air cooling system
| ITEM | LB250-F | LB250-S |
| Type | Air Cooling | Air&Water Cooling |
| Wall Thickness | 200 | 200 |
| Retraction System | Electric /Pneumatic&Manual | |
| Retraction Distance | 180 | 180 |
| Temperature | Measurement Range | 1200°C |
| Ambient | ≤70°C | |
| Control System | PLC:Automated retraction if air or power is disrupted | |
| Two-Stage:Worksite&Remote | ||
| Install Condition | Borehole size:Φ90mm | |
| Angle of View | Optional | |
| Resolution | 700TVL/1080P | |
| Power Supply | AC220V/12W | |
| Water Supply | Pressure | 0.1-0.5Mpa |
| Min flow | 0.2-0.8m³/h | |
| Air Supply | Temperature | ≤35°C |
| Pressure | 0.2-0.7Mpa | |
| Min flow | 5-10m³/h | |
| Assorted Cable | Vedio | SYVV75-5-1 |
| Power | RVV2X1.0 | |
| Remote control | RVV6X0.5 | |
| Install Distance | Max 15 meters from controller | |
| Optional Accessory | Vortex cooling tube,Remote controller | |
This type of CCTV working in the furnace with temperature under 1200°C,
the furnace wall thickness less than 300mm.
it widely using in the industrial and especially using for the kiln heads and grate coolers of cement factory,
coal supply pipes of power plants,
The the camera lens enter until the observation hole of the furnace wall,
it observe the condition of the workpiece ,
material running and flame shape in the furnace,
When the air supply stopped, the power off,
or over temperature, the built-in motor will turned on to return
the lens.
The design of the airflow distribution is scientific and efficient,
in front of the lens is covered by the rotating air curtain,
the air curtain is enhanced and sweeping area is increased,
this design effectively prevents the dust covering the objective lens in the furnace,
so this system can stable and long time working with free maintenance.
