Used Turbine Oil Regeneration System Machine, High Vacuum Turbine Oil Filter Plant

ASSEN TY Turbine Oil Regeneration System Plant

What can ASSEN’s TY can do ?

The ASSNE TY Vacuum Dehydration Process lowers the particle pressure, which assists in removing the water from the oil. Just like boiling water on top of Mount Everest, lowering the pressure allows water (and other volatile materials) to boil at a much lower pressure. At the typical pressures used by most ASSEN vacuum dehydrators, water boils at 49°C to 55°C. By heating the oil, typically to 66°C to 71°C, water is vaporized inside the dehydrator, without causing excessive oil degradation due to thermal and oxidative stress. In most dehydration process, the air is warmed and dried prior to being passed over the oil, encouraging the water to transfer from the oil into the air. To maximize the process, the oil is thinned to obtain the greatest amount of surface area exposure possible. This is achieved by allowing the oil to pass over a number of surfaces internally in the vacuum chamber, or by creating an umbrella spray within the chamber through which the dry air passes. The real benefit of this process is its ability to remove dissolved water and other low-boiling liquid impurities such as fuels and solvents. The removal of dissolved water makes it ideal for systems requiring low target levels of moisture. It is particularly useful in environments where large volumes of oil are at risk from the process or system, such as in steam turbines or paper mills. In fact, for lightly additized oils such as turbine oils and transformer oils, a vacuum dehydrator can remove as much as 80 percent to 90 percent of dissolved water, achieving water levels as low as a few ppm. Our advantage is the TY plant offer the ability to remove moisture to a very low levels. The greater the volume of oil and water, and the lower the target moisture level, the more cost-effective vacuum separation becomes.

Features

1. It adopts the coalescence and separation technique and three-dimensional flash distillation technique, and it has strong ability to break emulsion and remove water from the oil.
2. Optimized electric heating system with automatic constant temperature controller ensures the oil temperature to be even and stable.
3. Precise multi-stage filtration system helps remove different kinds of impurities with high quality filter element of better ability of containing pollutants and long service life.
4. Advanced infrared oil level control system and pressure protection device make operation simple and safe.
5. It can purify any kinds of turbine oil used in steam turbine and water turbine online and onsite.
6. Air cooling system helps cool down air and gases from the flash distillation column so as to extend the service life of vacuum pump, avoiding the inconvenience of water cooling.
7. The machine can also be installed with digital flow meter and timer to calculate and record the volume of output oil and working hours (it's optional).
8. Aluminum electric control cabinet has the merits of heat conducting and anti-explosion.
 

Technical Data: