Oils inside transformers are mainly for insulating purpose- apart
from which they also suppress corona and arcing, and also act as
coolants inside the machines. These oils must be maintained
absolutely clean and dry in order to achieve and sustain the
optimal insulating performance and dielectric strength. Here rises
the need for transformer oil purification process. ASSEN ZYD Transformer Oil Recycling Machine is the key to transformer
reliability, performance and longevity. Your transformer's
insulating oil should be free from moisture, dissolved gases and
particles that accumulate as the oil ages. Even some new oils may
require treatment to limit these contents to acceptable levels.
Scope of our Supply:
All types with different functions, with various spare parts can be
supplied according to Customer’s requirements.
In a single pass through the purifier at a full flow rate:
Water Removal: From 50 ppm down to less than 5 ppm in a single pass & down to
3 ppm after two passes. (According to the PPM Tester)
Gas Removal: From fully saturated with air (10% to 12% by volume) down to less
than 0.1% by volume.
Particulate Matter Removal: 98% of particles over 0.5mm or over 1 mm or over 5mm at customers
Dielectric Strength: Improve dielectric strength up to 75-80KV for New oil.
1. Dehydration, degassing and impurity removal of 110-1100KV main
transformer insulation oil .
2. Acetylene removal of 110-1100KV main transformer insulation oil
3. Vacuum drying of 110-1100KV main transformer insulation oil .
4. It can remove not only 100% free water and 99.9% dissolve water,
but also 100% free gas and 98% dissolve gas.
5. Customized parts: PLC, frequency conversion technology, trailer
and so on.
6. Advantages and characteristics
|Working vacuum||MPa||0.08 ～ 0.099|
|Temperature Range||℃||20 ～ 80|
|Power|| ||Three Phase 50HZ380V(as per the customer's requirements)|