The conventional sampling methods are as follows:
A) nasal swab: gently wipe the swab head into the nasal passages of
the nasal passages, and then slowly exit after stopping for a
moment. Wipe the other nostrils with another swab, immerse the swab
head in the sample, and discard the tail.
B) pharyngeal swabs: wipe the bilateral pharyngeal tonsils and the
posterior pharyngeal wall with swabs, immerse the swab head in the
sampling fluid, and discard the tail.
C) gargle: gargle with 10mL normal saline, rinse the head back,
make the "Oh" sound, let the saline rotate in the pharynx, and
collect the lotion with the 50mL empty sampling tube.
D) nasal lotion: the patient took his posture and his head was
slightly backward, injecting 50mL normal saline into the nostril by
pipette. He told the patient to simultaneously send K tone to close
the pharyngeal cavity, then let the patient lower his head and let
out the normal saline, collect the lotion with 50mL empty sampling
tube, and repeat the process to wash the two nostrils.
E) nasopharyngeal aspirates: tracheal and bronchial secretions are
often collected by this method. Mucus is extracted from the
nasopharynx with a collector connected to a negative pressure pump.
First, the collector head is inserted into the nasal cavity, and
the negative pressure is turned on. The head of the collector is
collected and slowly pushed out. Collecting mucus and washing the
collector with liquid 5mL for three times.
F) autopsy specimens: autopsy tissue specimens were collected and
samples were separated when necessary. Specimens were autopsy
tissue.
G) samples of mycoplasma, chlamydia and Ureaplasma samples: male:
use sterile cotton swabs to rotate around the urethra about 2cm for
a few seconds. Female: remove the mucus from the cervical mucus and
insert the 1-2cm into the cervical canal with sterile swab
Material | Nylon flocked tip+ABS stick |
Color | White |
Size | 3",4",6",8",16" etc customized |
Sterile | Non-sterile/EO/R |
Packing | Customized |
Certificate | CE0197, ISO13485, Japan registration, Russia registration. |
OEM & ODM | Yes |
Application | Sampling, cleaning |
| | | | |
| | | 200 pcs/zip bag, 4000pcs/ box | |
| | | 200 pcs/zip bag, 4000pcs/ box | |
| | | 200 pcs/zip bag, 4000pcs/ box | |
| | | 200 pcs/zip bag, 4000pcs/ box | |
| | | 200 pcs/zip bag, 4000pcs/ box | |
Instruction
1. Remove the swabs from its package.
2. Ask the patient to open their mouth and vigorously rub the
inside of each cheek and over the gums of the test subject for 30
seconds.
3. Air dry the swab for 3 minutes.
4. Snap the swab at the break point to fit in tube and screw the
cap tightly.
5. Label with appropriate patient information.
6. Place specimen in the biohazard bag and seal bag.