Outdoor Indoor SC APC Connectors For Fiber Optic Patch Cord Cable
The key is also used for repeatable alignment of fibers in the
optimal, minimal loss position.
Multimode versions of this connector are also available.
Optical fiber in use not excessive bending and winding, this will
increase the light attenuation in the transmission process. Fiber
jumper after use must use to protect the optical fiber attachment,
dust and oil will damage the fiber coupling.
Both ends of the optical fiber patch cord transceiver module
wavelength must be consistent, that is to say the two ends of the
optical fibre optical module must be the same wavelength, the
simple discrimination method is the light module to the colour
This high precision, ceramic ferrule connector is equipped with an
anti rotation key, reducing fiber endface damage and rotational
alignment sensitivity of the fiber.
---Low insertion loss and back reflection loss
---Superior Quality Standard PC/UPC/APC Polishing
---Standard: Telcordia GR-326-CORE, TIA/EIA and IEC
---High temperature stability
|1310/1550nm LD Light||0.2||0.2||0.2||0.2|
|RL(dB)||1310/1550nm LD Light||65||55||50||35|
|Humidity thermal cycle|
1.5 height, 8 times
|Repeat||10 Times inserts||0.1|
2. Mechanical Performance and Working temperature
Φ3.0 Fibre Curl Radius
|Φ3.0 Anti-Tensile Strength||>9.0||Kgf|
|Main Mechanical Size||SEE LAYOUT||-|
3. 3D Index
|Radius of Cury(mm)||5-12||10-25||7-25|
The fiber optic patch cord mainly used on patch panel or for the
connection between outlets and terminal equipment.It also widely
used for high bit rate data transmission,telecommunications,tesing
instruments,active device terminations,LAN/WAN and FTTX.
If the fiber optic connector is dirty, you can use a cotton swab
dipped in alcohol cleaning, otherwise it will affect the quality of
CIV Assessment report (627K).pdf