Dome Type Fiber Optic Splice Closure 3 Inlets And 3 Outlets 12 / 24 Cores

3 inlets and 3 outlets Dome Type Fiber Optic Splice Closure FTTH FTTX

Detailed product decription

Dome Type Fiber optic splice closure  is suitable for single core and ribbon fiber ,

they apply to direct-buried,aerial ,pipelined applications.

Ø Asdesign of independent innovation,spinning type sealing device could effectively reduce the chance that sealing performance might be affected due to human factors, and greatly improve the credibility of sealing performance.

Ø Thesealing device of the closure adopts self-impacted hoop. The closure will besealed perfectly while the hoop fastened.

Ø Sealingstructure: Mechanical sealing ,It has four ports , andcould be used for both single core and ribbon fibers; apply to directburied,aerial,pipe-lined applications.

Ø The installation accessoriesprovided: sealing tape 1pc,pvc insulation tape 1pc,splice pipe ,nylon tie4pcs,plastic spanner 1pc,sticker, pole mounting hoop 1set
 

       Main technical Indexes:

Ø Seal performance : the pressurein the closure is 100Kpa+-5kPa,put the closure into the water for15minutes,there is no air bubble ,and observed it for 24 hours ,there is nochange of air pressure

Ø Re-entry performance:after 3times of normal operations ,it can still be up to the seal performance standard

Ø Insulation resisitance: ≥2x10⁴MΩ

Ø Withstand voltage strength :there is nopuncture and no arc-cover after the function of 15KV_DC/1min.