Dongguan Qingying Industry Co., Ltd. |
|
The fiber optic patch cord mainly used on patch panel or for the connection between outlets and terminal equipment.It also widely used for high bit rate data transmission,telecommunications,tesing instruments,active device terminations,LAN/WAN and FTTX.
Under normal circumstances, the short wave optical module uses
multimode fiber (orange fiber), It uses a single mode fiber (yellow
fiber) to ensure the accuracy of data transmission.
Technical specifications:
Item | Unit | LC/SC/FC/ST Fiber Patch Cord | ||||
SM | MM | |||||
Fiber Diameter | um | 9/125 | 65.5/125 | 50/125 | ||
Endface Type | PC | UPC | APC | PC | PC | |
Insertion Loss | db | ≤0.2 | ≤0.15 | ≤0.2 | ≤0.1 | ≤0.1 |
Return Loss | db | ≥45 | ≥50 | ≥60 | - | - |
Insert-pull Test | db | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.15 | ≤0.15 |
Interchangeability | db | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.1 | ≤0.1 |
Temperature Range | ℃ | -40~+80 |
Fiber jumper after use must use to protect the optical fiber attachment, dust and oil will damage the fiber coupling.
If the fiber optic connector is dirty, you can use a cotton swab
dipped in alcohol cleaning, otherwise it will affect the quality of
communications.
Features:
---Low insertion loss and back reflection loss
---Superior Quality Standard PC/UPC/APC Polishing
---Standard: Telcordia GR-326-CORE, TIA/EIA and IEC
---Good durability
---Good exchangeability
---High temperature stability
Applications:
Gigabit Ethernet; Active device termination; Telecommunication
networks; Video;
Multimedia; Premise installations; Local area networks; FTTH FTTX
applications; CATV.