|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Nide team could manufacture insulation material as per customer’s drawing and samples.
If customer only has samples, we could also design drawing for our customer.
We also provide customized service.
Nide pays high attention on production detail and process to guarantee the insulation material quality.
Introduction and features
DMD is made of two layers of polyester fiber paper with one of polyester film.
It is a three-layer combined material.
It shows excellent mechanical and electrical properties and good heat resistance.
Surface should be bright and clean, no small holes, delaminating, mechanical impurity or damage.
Drape or bubble is permitted under the allowable thickness tolerances. After opening, the surface should not stick.
Technical requirement
| Thickness: | 0.15~0.4mm |
| Width: | 5mm~1000mm |
| Thermal class: | Class B |
| Color: | White |
Application:
The insulation paper is widely used in slot, phase and liner insulating of motor, transformer and so on.
Information needed for insulation material inquiry
It will be better if customer could send us detailed drawing including below information.
1. Insulation material type: insulation paper, wedge, (including DMD,DM, polyester film, PMP,PET, Red Vulcanized Fiber)
2. Insulation material dimension: width, thickness, tolerance.
3. Insulation material thermal class: Class F, Class E, Class B, Class H
4. Insulation material applications
5. Required quantity: normally its weight
6. Other technical requirement.
About Motor component and accessories
NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.
