|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Electrical Motor Coil Inserting Machine , Stator Semi auto insertion machine
Quick Detail:
Description:
This machine is used to inserting coil and wedge into stator. And it can insert coil and wedge simultaneously. This HMI can set all the necessary data. With easy and convenient tooling change process, this machine is suitable for three phase motor, fan motor and other motor, with a veriety model number but low output.
Wedge fedding mode can be set according to different motor.Horizontal Winding Inserting Machine is equipped with human-machine control interface, It has the characteristic of widely application, high automation, easy operation and convenient tooling change.
Specification:
| Stator ID | 20~110mm |
| Stator OD | ≤160mm |
| Stator height | 20~150mm |
| Tooling travel | 60mm |
| Wire Material | Copper wire/Alum wire |
| Slot number range | 8-48 slots |
| Power supply | 380V/ 50/60Hz 3Kw |
| Weight | 400Kg |
| Dimension | 1500*680*1500mm |
Operation step:
Power on the machine
Insert the wire by winding form
Adjust the tooling according to different model stator
Put stator to the tooling
Set the stator diameter in the touch screen then select the pre-set data.
Press "start" button.
Machine will automatically do coil inserting.
Take out the stator
Application:
This machine is suitable for three phase motor, fan motor and other motor, with a veriety model number but low output.
Information needed for stator winding inserting machine inquiry
It will be better if customer could send us detailed drawing
including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Wire connection drawing
4. Stator application
5 Required productivity
6 Other technical requirement
The touch screen of this machine
