|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Stator coil winding shaping and final forming machine
This type of motor stator coil winding shaping machine is PLC
programming, driven by hydraulic system. The design of tooling is
based on the flexible principles of inner expansion. Outer wrapping
and edge forming to form stator winding. This coil forming machine
is consist of machine framework, oil hydraulic power system,
control system, and forming tooling system.
Technical parameter:
| Item | Unit | Data |
| Size | mm | (L)650×(W)950×(H)2300 |
| Tooling included weight | kg | Around 700 |
| Power supply | 380V/50Hz three phase four wire power | |
| Working pitch time | S/PC | ≤13 |
| ID | mm | Φ30~Φ120 |
| OD | mm | Φ50~Φ160 |
| Stack height | mm | 15~160 |
| Tooling stroke | mm | ≤70 |
Machine operation steps
1. After connected to the power source and air source, switch the
button to on. Press hydraulic start button; switch to auto mode.
3. Press "reset" button. Check if all parts are in the correct
position.
4. Put stator into the groove. Press "Start" button by two hands.
Machine will auto form.
Note: there are two triangle blocks (diagonal line) in the groove.
The two holes on the stator should be aligned to the two triangle
blocks separately.
Electric switch and indicator details
| Name | Function | Location |
| Power indicator | General power indicator(On: twinkle/Off: Dark ) | Electrical cabinet front |
| Power | Machine general power switch | Electrical cabinet front |
| Hydraulic start | Hydraulic system general switch | Electrical cabinet front |
| Reset | All action return to origin | Electrical cabinet front |
| Upper mould up down | Rise or lower the tooling | Electrical cabinet front |
| Auto/Manual | Switch over auto and manual condition of machine | Electrical cabinet front |
| Grating protection | Protect operator when machine is running | Front baffle pillar |
| Start | Cycle start button, need to be used with 9 together | Button box |
| Start | Cycle start button, need to be used with 8 together | Button box |
| Emergency stop | Separate brake | Button box |
| Emergency stop | Separate brake | Button box |
