|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Auto BLDC motor stator insulation board / Aluminium Alloy Color or Customized end plate pressing machine
I.The insulation board pressing Machine structure and function:
1.Machine consists of main machine, pneumatic system, electric
control system, force measuring system;
2. The main cylinder and the top of the cylinder equipped with a
pressure switch . And the main cylinder compression stroke
adjustable, to avoid over-pressure caused by insulation board
rupture;
3.Pneumatic system consists three port five through reversing
valve, filter regulation valve, pressure regulation valve, silencer
and necessary pneumatic attachments;
4.Electric control system consists of miniature circuit breaker,
indicator, time relay, middle relay, switch button and necessary
electric attachments;Electrical components (such as sensors,
pressure switches, etc.) with plug-type;
5.safety device from the light curtain, the protection of a high
degree of 500mm, three semi-enclosed protective cover,
6.Double palm start buttons, operation panel is at the front side
of the machine;it is very easy to operate
7.Adapts emergency button, once it has emergency situation, press
down this button, machine will stop working immediately, it enhance
the safety and reliability;
8.Material conveyor and machine height can be adjusted;In the
material conveyor with a cylinder to prevent NG parts into the next
process;
9.Add 2 insulation panels to the left and right of the machine.
10.Manual loading, automatic unloading, can be connected to
automatic lines.
11.Piston cylinder pressing down stroke is adjustable, helpful for
protecting the end plate from bearing too much pressure;
12.There is guiding device, during pressing, there is no axis
direction rotation;
13.There is filter pressure reducing valve, pressure is adjustable.
II.The main technical information:
| Working table of the main machine: | 285×320(mm) |
| closing height: | 300mm |
| working stroke: | 150mm |
| Working pressure: | 5KN (0.5T)/ 0.4Mpa |
| maximum. Open the height: | 200mm |
| Work schedule: | 150mm |
| Table size: | 650 * 700mm |
| Throat depth: | 175mm |
| The distance between the workbench and the floor: | 780 mm |
| Stator out of the cylinder stroke: | 100mm |
| working pressure: | 10Kg |
| Cabinet size: | 500 * 200 * 600mm |
| Rack and cover: | 40 * 40mm aluminum. |
| Table and the ground distance: | 1000mm (with brake wheel) |
| Material Conveyor Length: | 700mm (with 1 set of cylinder) |
| Machine color: | aluminium alloy color or customized |
III.BLDC motor stator insulation board:
BLDC motor stator insulation end plate pressing machine:
