Home Companies Oky Newstar Technology Co., Ltd

Step Up Boost Converter Power Supply Arduino Sensor Module 100W LTC1871 DC To DC

Contact Us

[China]

Trade Verify

Address: Room1105, Block B, Chinto Technology Building, Minzhi Road, LongHua, ShenZhen city, GuangDong province, China

Contact name:Erica Teng

Oky Newstar Technology Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Step Up Boost Converter Power Supply Arduino Sensor Module 100W LTC1871 DC To DC

Country/Region china
City & Province shenzhen guangdong
Categories Electronics Stocks

Product Details

Step Up Boost Converter Power Supply Arduino Sensor Module 100W LTC1871 DC To DC

 

Description

The module has high power output and efficiency (up to 96%). The output can be up to 65W (and can further reach 100W when enhance heat-transfer).
Onboard we have a voltmeter to show clearly the input / output voltage (we can select to show input/output voltage by pressing on the button onboard). When the "IN" LED lights on, the voltmeter displays input voltage; When the "OUT" LED lights on, the voltmeter displays output voltage.

You can easily adjust voltage by the potentiometer onboard and the voltmeter onboard. You won't even need a multi-meter when adjusting. Very convenient.

This display part adopts advanced voltage meter microprocessor,boosting part adopts American imported boost controller,
through the use of the power MOSFET on resistance and save the current detecting resistor, maximizing it efficiency to 96.4%.
Import the big power MOS low resistance pipe, large package, high current, high efficiency Schottky, super wide thickened wire
of PCB low temperature rise, high power and high efficiency.Ultra wide working voltage,when the input and output voltage is above
20V it can be up to 128W of output power.Long life type switching power supply special high frequency high capacity and low
resistance (low ESR) aluminum electrolytic capacitor to lower output ripple. Module chip used are imported materials, stable performance.
This module is a more intelligent, humane, high cost performance module.

Specification

1.Input Voltage:3-35V DC (Note: When input voltage is less than 4V, onboard voltmeter will not work).
2.Input Current:9A (max).
3.Output Voltage:3.5-35V DC (this board is boosting board, output voltage>=Input voltage).
4.Output Current:6A (max).
5.Output Power: 65W (when the input and output voltage greater than 20V up to 100W).
6.Conversion Efficiency: 96% (the highest).
7.Output Ripple:40mV(TYP).
8.Onboard Voltmeter Range:4-40V .
9.Error:+/-0.1V.
10.Size:67.5mmx41.5mmx14mm/2.66"x1.63"x0.55"(inch) (approx).

Application range:

DIY a regulated power supply, input 5V can be, the output can be 5-35V adjustable.
To power your electronic device, you can set the output value according to your system voltage. For example, 3.7V lithium L 5V do mobile power, 7.4V or 12V to 19 liters of laptop power supply etc..
As a vehicular power supply, power your laptop, PDA, or digital products.

 

Package Included:

1 pc 100W LTC1871 DC To DC Step Up Boost Converter Power Supply Module

 

 

we also provide ODM service.

 

 

Competitive Advantage:
1.Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around The Globe.
4. High Quality With Global Standards.
5. 3 year factory warranty
6. Safe shipping way and payment

 

 

More Products:

4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School GamesUNO R3 + breadboard 400 point + 9V battery snap Starter Learning Kit4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School Games
HC-06 Bluetooth Wireless Module
4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School GamesMega 2560 R3 ( CH340G )4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School GamesHC-SR501 Human body Pyroelectric Infrared sensor PIR
4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School GamesDC 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Test Module4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School GamesUltrasonic Sensor HC-SR04
4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School GamesLCD 1602 I2C module
(Yellow Green light)
( Red board module)
4WD DIY Smart Science Arduino Car Robot / Robot Car Chassis Kit For High School Games20cm Male TO Female 40Pin Solderless Jumper Breadboard Wires

 

 

 

FAQ:
1. What is the delivery time?
Normally, 1-5 workdays after payment;
Special requirement orders, delivery time is negotiable.
2.If the products can’t work after receiving it,what should I do?
We will replace new items for you at once, and respect your final decision for wrong goods.
3.If the products don’t meet my demand after I received it,can I return it?
Yes,no problem.
You can return back to us, we will refund your full payment.

Hot Products

Factory Price 24pcs Sensor Kit With UNO R3 Development Board DHT11 Sensor List of Kits: Kit List Qty ...
GY-US42 3-5V IIC Flight Control Ultrasonic Range Module for Pixhawk Description: GY-US42 is a low ...
16 in 1 HCSR04 Sensor HCSR04 Module Starter Kit 16pcs board Kits for Smart Home Description: Kit ...
DS18B20 Digital Infrared Temperature Sensor Module For Arduino Specification This is DS18B20 digital ...
Red Active Buzzer Sensor Alarm Module for Arduino Description This module is ideally suited to ...
LM393 Chip HR202 Testing Detection Humidity Sensor Module Features 1 , using high quality HR202 ...