SMD components bo Starter Kit For Arduino With detail manual for 24
1. Using the Arduino UNO Starter Kit, You can design 24 different tests
2. Detail manual for the 24 tests will provided
3. Hot sale Arduino Starter Kit
4. Good quality Arduino Starter Kit
This kit walks you through the basics of using the Arduino in a
hands-on way. You'll learn through building several creative
projects. The kit includes a selection of the most common .
Starting the basics of electronics, to more complex projects, the
kit will help you control the physical world with sensor and
2012 UNO R3 Board
Mini Breadboard shield with mini board
830 points Breadboard
SMD components bo
LED red yellow green
Mercury switch or ball switch
Resistance 220R, 1K, 10K
LM35 Temperature sensor
Male to male jumper wire
9V battery clip
IR mini remote control
1602 LCD LCD module
5V stepper motor + ULN2003 driver board
8*8 DOT MATRIX
The Arduino Uno is a microcontroller board based on
the ATmega328 . It has 14 digital input/output pins (of
which 6 can be used as PWM outputs), 6 analog inputs, a
16 MHz ceramic resonator, a USB connection, a power jack,
an ICSP header, and a reset button. It contains everything needed
to support the microcontroller; simply connect it to a computer
with a USB cable or power it with a AC-to-DC adapter or battery to
The Uno differs from all preceding boards in that it does not use
the FTDI USB-to-serial driver chip. Instead, it features
the Atmega16U2 (Atmega8U2 up to version R2)
programmed as a USB-to-serial converter.
Revision 2 of the Uno board has a resistor pulling the 8U2 HWB
line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
- 1.0 pinout: added SDA and SCL pins that are near to the AREF
pin and two other new pins placed near to the RESET pin, the IOREF
that allow the shields to adapt to the voltage provided from the
board. In future, shields will be compatible with both the board
that uses the AVR, which operates with 5V and with the Arduino Due
that operates with 3.3V. The second one is a not connected pin,
that is reserved for future purposes.
- Stronger RESET circuit.
- Atmega 16U2 replace the 8U2.
"Uno" means one in Italian and is named to mark the upcoming
release of Arduino 1.0. The Uno and version 1.0 will be the
reference versions of Arduino, moving forward. The Uno is the
latest in a series of USB Arduino boards, and the reference model
for the Arduino platform.
Summary of 2012 UNO R3 Board
Input Voltage (recommended)
Input Voltage (limits)
Digital I/O Pins
14 (of which 6 provide PWM output)
Analog Input Pins
DC Current per I/O Pin
DC Current for 3.3V Pin
32 KB (ATmega328) of which 0.5 KB used by bootloader
2 KB (ATmega328)
1 KB (ATmega328)
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment