|
[China]
Trade Verify
Address: Maanshan City,Anhui Province,China.
Contact name:sylvia Wang
Anhui Aoxuan Heavy Industry Machine Co., Ltd. |
|
Verified Suppliers
|
|
|
Performance:
1. Frame welded, vibration to eliminate stress, high in rigidity,
sturdy an durable. Hydraulic drive, swing beam, return of knife
beam is smooth and prompt by accumulator or nitrogen cylinder,
stead & reliable perfoman.
2. The position of low blade can be adjusted to ensure the
epuilibrium of the gap after regrinding. the protable and prompt
adjusted of the blades gap, the value of gap is indicated by dial,
positioning reliable.
3. Setting the backgauge by motor. The displessly devices used to
the backgauge value and the shearing times are on the front of the
machine.
4. The stroke of knife or cbeam can be adjusted steplessly,
conveniently an fast.
5. Preselection of single or continous strokes. Preselection of
cutting number and cutting
Technical Parameters:
| Model | Thickness (mm) | Cutting Length (mm) | Cutting Angle (°) | Material Strength (KN/CM) | Stroke (times/min) | Power (kw) | Dimension(mm) |
| 4×2500 | 4 | 2500 | 1°30’ | ≤450 | 10 | 5.5 | 3040*1610*1620 |
| 4×3200 | 4 | 3200 | 1°30’ | ≤450 | 10 | 5.5 | 3840*1610*1620 |
| 4×4000 | 4 | 4000 | 1°30’ | ≤450 | 8 | 5.5 | 4600*1700*1700 |
| 4×6000 | 4 | 6000 | 1°30’ | ≤450 | 5 | 7.5 | 6460*2100*3200 |
| 6×2500 | 6 | 2500 | 1°30’ | ≤450 | 10 | 7.5 | 3040*1610*1620 |
| 6×3200 | 6 | 3200 | 1°30’ | ≤450 | 9 | 7.5 | 3840*1610*1620 |
| 6×4000 | 6 | 4000 | 1°30’ | ≤450 | 8 | 7.5 | 4620*1750*1700 |
| 6×5000 | 6 | 5000 | 1°30’ | ≤450 | 6 | 7.5 | 5400*1750*1700 |
| 6×6000 | 6 | 6000 | 1°30’ | ≤450 | 5 | 11 | 6480*2100*2300 |
| 8×2500 | 8 | 2500 | 1°30’ | ≤450 | 10 | 7.5 | 3040*1700*1700 |
| 8×3200 | 8 | 3200 | 1°30’ | ≤450 | 8 | 7.5 | 3860*1700*1700 |
| 8×4000 | 8 | 4000 | 1°30’ | ≤450 | 8 | 7.5 | 4640*1700*1700 |
| 8×5000 | 8 | 5000 | 1°30’ | ≤450 | 8 | 7.5 | 5400*2400*2000 |
| 8×6000 | 8 | 6000 | 1°30’ | ≤450 | 8 | 11 | 6480*2100*2350 |
| 10×2500 | 10 | 2500 | 1°30’ | ≤450 | 9 | 11 | 3040*1700*1700 |
| 10×3200 | 10 | 3200 | 1°30’ | ≤450 | 9 | 11 | 3860*1700*1700 |
| 10×4000 | 10 | 4000 | 1°30’ | ≤450 | 8 | 11 | 4650*2100*2000 |
| 10×6000 | 10 | 6000 | 2° | ≤450 | 5 | 15 | 6500*2100*2300 |
| 12×2500 | 12 | 2500 | 2° | ≤450 | 9 | 18.5 | 3140*2150*2000 |
| 12×3200 | 12 | 3200 | 2° | ≤450 | 9 | 18.5 | 3880*2150*2000 |
| 12×4000 | 12 | 4000 | 2° | ≤450 | 8 | 18.5 | 4680*2150*2000 |
| 12×5000 | 12 | 5000 | 2° | ≤450 | 6 | 18.5 | 5900*2150*2000 |
| 12×6000 | 12 | 6000 | 2° | ≤450 | 5 | 18.5 | 6900*2600*2700 |
| 12×8000 | 12 | 8000 | 2° | ≤450 | 5 | 18.5 | 9000*3500*3500 |
| 16×2500 | 16 | 2500 | 2°30’ | ≤450 | 9 | 18.5 | 3140*2150*2000 |
| 16×3200 | 16 | 3200 | 2°30’ | ≤450 | 8 | 18.5 | 3880*2150*2000 |
| 16×4000 | 16 | 4000 | 2°30’ | ≤450 | 8 | 18.5 | 4650*2150*2200 |
| 16×5000 | 16 | 5000 | 2°30’ | ≤450 | 6 | 18.5 | 5900*2600*2700 |
| 16×6000 | 16 | 6000 | 2°30’ | ≤450 | 5 | 22 | 6900*2700*2700 |
| 16×8000 | 16 | 8000 | 2°30’ | ≤450 | 5 | 22 | 9000*3500*3500 |
| 20×2500 | 20 | 2500 | 3° | ≤450 | 8 | 22 | 3440*2300*2500 |
| 20×3200 | 20 | 3200 | 3° | ≤450 | 8 | 22 | 4150*2350*2700 |
| 20×4000 | 20 | 4000 | 3° | ≤450 | 5 | 22 | 4850*2350*2700 |
| 20×6000 | 20 | 6000 | 3° | ≤450 | 4 | 22 | 4850*2350*2700 |
| 25×2500 | 25 | 2500 | 3° | ≤450 | 8 | 37 | 3200*2700*2900 |
| 25×3200 | 25 | 3200 | 3° | ≤450 | 5 | 37 | 4200*2700*2900 |
| 30×2500 | 30 | 2500 | 3° | ≤450 | 4 | 37 | 3300*2900*2900 |
| 30×3200 | 30 | 3200 | 3°30’ | ≤450 | 4 | 40 | 4200*2900*2900 |
| 40×2500 | 40 | 2500 | 4° | ≤450 | 3 | 75 | 3200*3300*3000 |
| 40×3200 | 40 | 3200 | 4° | ≤450 | 3 | 90 | 4300*3300*3200 |
STANDARD EQUIPMENTS
√ Hardened blades.
- Top blades : 2 sides
- Bottom blades : 4 sides
√ E21S controller.
√ 250mm throat depth.
√ 600mm motorized backgauge system with 0,1 mm accuracy.
√ 800mm side gauge and front support arms.
√ Metric and inch rulers.
√ Front, side and back safety panels which are suitable for CE
norms.
√ Sheet sliding system.
√ Schneider Electric System.
√ Rexroth hydraulic system.
√ Hold down cylinders.
√ Moveable foot pedal.
√ Manual blade gap adjustment.
√ Emergency stop button.
√ Collapsible finger protection.
OPTIONAL EQUIPMENTS
√ Optional throat depth.
√ Front angle gauge.
√ Side gauge and front support arms in optional lengths.
√ Sheet conveyor and stacking system.
√ Front Gauge X1, X2 axis and backgauge X3, X4 axis.
√ Optional backgauge stroke.
√ Sheet support system for thin sheets.
1- Pneumatic support system. (Lever type)
2- Pneumatic support system. (Monobloc panel type)
√ Hydraulic oil cooling and heating system.
√ Optional solid table.
√ Stainless steel blades.
√ Ability to increase stroke amount per minute.
√ Light safety system for finger protection.
√ Optional alternative colors.
√ Coolant system or heater can be placed in electric panel during
ambient conditions.
√ Double foot pedal.
√ Electrical panel or controller can be placed on right side of the
machine.
√ Laser cutting line.
√ Central lubrication system.
Details:
CNC Control system
E21S,Nanjing Estun
MD11,DAC310, DAC360 control system can be optional
Blad clearance adjustment
Rapid adjustment mechanism for rearranging blade clearance,easy
operation by hand,realizing stepless adjustment of blade clearance
Safety fence
Left and right protective guard guarantees operation safety
Hydraulic system
* Hydraulic system is from Bosch -Rexroth, Germany.
* Adopt integrated hydraulic control system, more reliable and easy
for maintenance.
* Hydraulic transmission with high reliability, integrated
hydraulic system can effectively alleviate problems caused by
leakage of hydraulic fluid
* Overload overflow protection is outfitted to hydraulic system,
which can assure no leakage, and the oil level can be read or seen
directly.
* According to customer requirements, designated brand
South Korea Kacon Pedal Switch
South Korea Kacon Pedal Switch, lengthened the service life and
improved operational sensitivity
FAQ:
1. Are you the manufacture?Can we visit your factory?
We are manufacturer and we are located in Anhui,China.And we have
our
own design team for products design. And welcome you visit our
factory and check our machine qualtiy on spot,any question will
be solved on spot at first time.
2.What's your main product and what is your main foreign market?
Our main products are press brake,shears machine,press,cut
ting machine,locking machine ,auto duct line and related products.
Our main foreign market are Asia, North America, Europe, Afr
ica.
3. And are you able to update the production process Information in
time after placing our order?
After confirming your order ,we would keep you updated of
production details of emails and photos.
4. Payment terms?
T/T, L/C, Western Union, Paypal, Alibaba Secure Payment ect. Buyer
pays 30% by T/T to start this order, rest 70%paid before shipment.
5.Are you provide product metal parts and provide us technical
guidance?
Wearing parts,Disassembly tool(free) are what we could provide.And
we can give you technical guidance.Our technical staff can go
abroad to provide you with technical guidance.
For more information, please contact me (^o^)/~
