Active Member
|
[China]
Address: NO.27,Jinlanling Street,Taigongling Village Dongguan 523829,Guangdong,China
Contact name:Eric
Aolittel Technology Co.,Ltd |
|
|
American UL Listed Miniature Glass Tube Fuse 3.15 A 250V 5 mm x 20 mm Medium Time Delay Slow Blow T Cartridge Fuses
Applications
Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits.
__________________________________________________________________________
Download________
Description
5×20mm time-Lag surge withstand glass body cartridge fuse designed to IEC specification.
Features
• Designed to International (IEC ) Standards for use globally
• Available in cartridge and axial lead form
• Meets the IEC 60127-2, Sheet 3 specification for time-Lag fuses
• RoHS compliant and lead-free.
• Medium time-delay, low breaking capacity
• Available with optional axial leads
• 5 mm x 20 mm physical size
• Glass tube, nickel-plated brass endcap construction
• Designed to UL/CSA 248-14
Agency Approvals
Voltage Rating | Agency | Ampere Range | Agency File Number |
| 125V/250V | UL | 200mA ~ 10A | E340427(JDYX) |
| C-UL | 200mA ~ 10A | E340427( JDYX7) | |
| PSE | 200mA ~ 10A | Pending | |
| KTL | 200mA ~ 10A | Pending |
Dimension (mm)
 |  |
NO. | Part Name | Material |
| 1 | Cap | Nickel Plated Brass |
| 2 | Body | Glass Tube |
| 3 | Fuse element | Alloy |
| 4 | Lead wire | Tin Plated Copper |
Specifications (A=125V/B=250V)
Part No. | Ampere Rating | Voltage Rating | Breaking Capacity | I2TMelting Integral(A2.S) |
| STC0100A/B | 100mA | 250V/125V | 10000A@125 V AC (200mA~10A);
35A@250V AC (200mA~1A);
100A@250V AC (1.25A~3.5A);
200A@250V AC (4A~10A).
| 0.005 |
| STC0125A/B | 125mA | 250V/125V | 0.01 | |
| STC0160A/B | 160mA | 250V/125V | 0.02 | |
| STC0200A/B | 200mA | 250V/125V | 0.04 | |
| STC0250A/B | 250mA | 250V/125V | 0.06 | |
| STC0300A/B | 300mA | 250V/125V | 0.08 | |
| STC0315A/B | 315mA | 250V/125V | 0.10 | |
| STC0350A/B | 350mA | 250V/125V | 0.13 | |
| STC0400A/B | 400mA | 250V/125V | 0.19 | |
| STC0500A/B | 500mA | 250V/125V | 0.32 | |
| STC0630A/B | 630mA | 250V/125V | 0.54 | |
| STC0750A/B | 750mA | 250V/125V | 0.93 | |
| STC0800A/B | 800mA | 250V/125V | 1.16 | |
| STC1100A/B | 1A | 250V/125V | 2.5 | |
| STC1125A/B | 1.25A | 250V/125V | 4.2 | |
| STC1150A/B | 1.5A | 250V/125V | 6.2 | |
| STC1160A/B | 1.6A | 250V/125V | 11 | |
| STC1200A/B | 2A | 250V/125V | 20 | |
| STC1250A/B | 2.5A | 250V/125V | 39 | |
| STC1300A/B | 3A | 250V/125V | 64 | |
| STC1315A/B | 3.15A | 250V/125V | 69 | |
| STC1350A/B | 3.5A | 250V/125V | 70 | |
| STC1400A/B | 4A | 250V/125V | 83 | |
| STC1500A/B | 5A | 250V/125V | 90 | |
| STC1600A/B | 6A | 250V/125V | 102 | |
| STC1630A/B | 6.3A | 250V/125V | 126 | |
| STC 1700A/B | 7A | 250V/125V | 129 | |
| STC 1800A/B | 8A | 250V/125V | 147 | |
| STC 2100A/B | 10A | 250V/125V | 221 | |
| STC2120A/B | 12A | 250V/125V | - | |
| STC2150A/B | 15A | 250V/125V | - | |
| STC2160A/B | 16A | 250V/125V | - | |
| STC2200A/B | 20A | 250V/125V | - |
Operating Characteristics
% of Ampere Rating(In) | Blowing Time |
| 100%* In | 4 hours Min |
| 135%* In | 1 hour Max |
| 200%* In | 120 sec Max |
Average Time Current Curves
HOW TO IDENTIFY AND REPLACE A BLOWN FUSE
A fuse is an safety component in electronic and electrical device
and it will blow if there is any excessive current.
Short circuit, overloading or device failure are the prime reasons
for excessive current.
Putting wrong fuse in device can result in personal injury, fire
and increase damage of your broken device.
Never replace a fuse with a higher amperage rating becouse your
device can draw more current than its supposed to and whole thing
can blow in your face.
Also dont put fuse in parallel or serial
Sometimes you can put smaller current rating fuse if e.g. your
device is rated to draw 300 mA but fuse is 500 mA then you can put
fuse that is close to 300 mA but not under 300 mA
Fuses are identified with the Amperage (A),Voltage (V) ,Burning
speed (Fast-blow,Slow-blow,Time Delay) ,Size and Material
(Ceramic,Glass,Plastic,Fiberglass)
There are Axial or Pigtail fuses with wire on the end and they are
made for soldering on pcb
Slow blow can handle more current then they are marked for small
amount of time and they are marked T and amperage (T2A, T1A,
T0,25A) and Fast blow are blowing at marked current , they are
marked F (F2A, F1A)
Voltage ratings are not marked in AC or DC
Ceramic fuses are more stable, some ceramic are also sand-filled
for extra protection and they can handle higher current rating
(more than 15A) a
Glass are see through and they blow faster becouse they dont have
sand that will absorb heat
Examples: Most multimeters use 10A 250V and 250 mA - 500 mA 250V
Fast blow fuse 5x20 mm
In this step you will need to disconnect device that isn't working
It's not so hard you just need to disconnect plug that goes to main
socket
I would also recommend to power off device first
NEVER OPEN DEVICE THAT IS STILL CONNECTED TO MAIN!
Fuses are usually at device input so look near power socket
When you pulling fuse out pull it gently so you wont damage fuse or
some components
If you have glass fuse you can easily see if fuse is burned or not
For ceramic types you will need continuity
checker/multimeter/ohmmeter
For continuity checker
Put fuse on black and red lead and if you hear beep than your fuse
is ok, if theres no beep fuse is burned
For multimeter/ohmmeter
Set multimeter to ohm setting (closest to 1Ω) and put one lead on
each end of the fuse and look at the display
If the meter shows a less than 1Ω then the fuse should be okay, if
it show that theres no connection (on my multimeter is 1 on left
side) then fuse is burned
Check one cap on fuse,PCB or manual for fuse ratings
There should be written something like : T2A250V, F1A250V that's
fuse rating
T is for slow blow fuse and F for fast blow fuse
2A or 1A is Amperage rating its usually just number and A
250V is Voltage rating its number and V
And then just measure the size of fuse
In small electrical device is usually 5x20mm
There are 5x20mm, 5x15mm, 6.3x32mm, 3.6x10mm, 5x25mm and 10x38mm
