Active Member
|
[China]
Address: 25 Building, No.1 Hua ke Three Road, Huayuan Industry Zone, Tianjin,China
Contact name:
Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd |
|
|
Dry epoxy polyester thermosetting powder coating paint/high quality
Powder coating is a technique used to apply a decorative and protective finish to a wide range of products that are used by both manufacturers and consumers. The powder is a mixture of finely ground particles of pigment and resin, which is electrostatically charged and sprayed on to the products to be coated. The charged powder particles adhere to the electrically grounded surfaces until heated and fused into a smooth coating in a curing oven. The result is a uniform, durable, high-quality and attractive finish. Powder coating is a superior finish that’s found on hundreds of products you come in contact with every day.
1.Pure Epoxy Powder Coating:for the best corrosion protection
2.Pure Polyester Powder Coating: for the highest exterior stability and performance
3.Epoxy-Polyester Powder Coating(Hybrid):offer the best chemical and solvent resistance
| Item | Details |
| Color | All colors are available |
| Gloss range | 5% - 95% (under 60 degree) |
| Surface | general type:smooth and consistent,excellent adhesion and leveling |
| art type:sandy, wrinkled, hammer tone, metallic effect,wood effect and etc | |
| Density | 1.3g/cm³- 1.8g/cm³(related to colors) |
| Curing condition | standard type:180℃/15 minutes |
| low temperature type:110℃/15 minutes | |
| Shelf life | 12 months in closed bag bellow 25℃ |
| Packaging | 20kg/plastic bag(inner) and paper carton(outer) |
| Storage | stored in closed packages with dry environment below 25℃ |
The main difference between our powder coatings and other paints is that the powders do not require solvents in any phase of the application. Therefore, our powder coatings are more eco-friendly than other paints which contain solvents that guarantee the flow and evaporate after application.
1.Uniform, durable coating surface without sagging or running
2.Close to zero VOC content = environmentally friendly
3.Fast application and short curing time
Electrostatic Powder Spraying Advantages
1.Difficult shapes can be coated
2.Film thickness between 30-250
3.Simple and low cost for automation
4.Changing colour is relatively simple
5.No pre-heating of components required
