Active Member
|
[China]
Address: No. 11 Huan Fu Road, Shang Sha Management District, Chang An Town, Dong Guan City, Guang Dong Province, China
Contact name:christy xiao
Dongguan Boges Communication Technology Co., Ltd |
|
|
GSM 900-1800 MHZ Internal Antenna With I-PEX 20278-112R-13 RF 1.13 Cable
Detail Product Description
Frequency: 824~960 MHz,1710 ~ 1880 MHz
S.W.R: 2.0 MAX
Impedance: 50 ohm
Peak Gain: 2 dB
Connector: UFL connector
Application:
1.Wi-Fi /WLAN /MEMO /Bluetooth System
2. Router
3. IEEE802.11 WLAN System
4. Wireless Communication System
Specification
A. Electrical Characteristics | ||
Frequency | 824~960 MHz,1710 ~ 1880 MHz | |
Impedance | 50 ohm | |
S.W.R | 2.0 Max. | |
Peak Gain | 2 dB | |
Return Loss | >= 10 dB | |
B. Material & Mechanical Characteristics | ||
Cable Type | RF 1.13 | |
Connector Type | UFL connector | |
Pull Force | >1.0 Kg | |
C. Environmental | ||
Operation Temperature | - 40 ˚C ~ + 65 ˚C | |
Storage Temperature | - 40 ˚C ~ +80˚C | |
Characteristics and Reliability Test
Test Items | Test Condition and Procedure | Requirements | |
C1 | S.W.R. | Set DUT on Network Analyzer; make individual calibration to test | Directive DUT specification |
M1 | Vibration | MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction | 1. No Visual Damage 2. Frequency Tol.<= 5% |
M2 | Random Drop | Height: 1.5 Meter; 3 directions; 1 time for each direction | 1. No parts separated 2. Frequency Tol.<= 5% |
M3 | Solderability | MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds | 1. Mounted on PCB 2. No Visual Damage |
M4 | Terminal- Pull Test | MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal | 1. Directive DUT specification 2. Frequency Tol.<= 5% |
M5 | Dimension | Inspection of dimension, color, material, package, surface process | Directive DUT specification |
E1 | Salt Spray | MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E2 | Humidity | MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E3 | Thermal Shock | 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E4 | Life (High Temp.) | MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
R1 | RoHS | With Reference to IEC 62321:2008 with flow chart | Directive RoHS 2002/95/EC |
R2 | PFOS | With Reference to USA EPA 3540C:1996 by LC/MS | Directive RoHS 2006/122/EC |
R3 | PFOA | With Reference to USA EPA 3540C:1996 by LC/MS | Directive RoHS 2006/122/EC |
