|
[China]
Trade Verify
Address: Industrial Cluster Area of Xinmi City, Henan Province，China.
Contact name:LI
Zhengzhou Annec Industrial Co., Ltd. |
|
Verified Suppliers
|
|
|
Insulating Thin Fire Clay Brick Clay Insulating Bricks Heat Resistant Red 1350C Insulating Fireclay Brick
Standard sizing:This brick is special size for pipes of industry
furance ,Special size and OEM Service also provide!
The size is precise, providing kinds of shapes according to
customer's drawing
Definition:
Insulating Thin Fire Clay Brick Clay Insulating Bricks Heat
Resistant Red 1350C Insulating Fireclay Brick refer to light-weight thermal insulation brick products with Al2O3
content of 30%-46%. With clay clinker or light clinker and plastic
clay as the main principle, Insulating Thin Fire Clay Brick Clay Insulating Bricks Heat
Resistant Red 1350C Insulating Fireclay Brick is usually produced by the combustible method. It can also be
produced by the chemical method or foam method to form a porous
structure. The use temperature is 1200-1400℃. The refractory is
characterized by high porosity, generally 40%-85%; low bulk density
below 1.5g/cm3; low thermal conductivity, generally below 1.0W
(m.K).
Compared with ordinary clay bricks, Insulating Thin Fire Clay Brick Clay Insulating Bricks Heat
Resistant Red 1350C Insulating Fireclay Brick are lighter in weight. The heat-insulating refractory products
with Al2O3 content of 30%~48% made of refractory clay as the main
raw material. Using refractory clay, floating beads, and refractory
clay clinker as raw materials, adding binders and sawdust, after
batching, mixing, molding, drying and firing, products with a bulk
density of 0.3~1.5g/cm3 can be obtained. Insulating Thin Fire Clay Brick Clay Insulating Bricks Heat
Resistant Red 1350C Insulating Fireclay Brick accounts for more than half of the total output of heat-insulating
refractory bricks, with tiny pores evenly distributed inside, with
a high porosity. Therefore, Insulating Thin Fire Clay Brick Clay Insulating Bricks Heat
Resistant Red 1350C Insulating Fireclay Brick can be ensured that the furnace wall loses less heat, and the fuel
cost will be reduced accordingly. Lightweight clay bricks also mean
less heat storage, so heating and cooling are faster, allowing
faster periodic operations. Lightweight clay refractory bricks are
suitable for the temperature range of 900℃~1650℃.
Advantage:
1. Good resistance to corrosion and abrasion,
2. Perfect thermal shock resistance,
3. Good spalling resistance,
4. High mechanical strength,
5. Good volume stability under high temperature,
6. Excellent thermal performance, and acid resistance.
Application:
Iron&steel making industry:Blast furnace,hot blast furnace(stove),pellet shaft furnace,hot metal ladle,steel ladle, tundish,heating furnace,soaking pit furnace,heat treatment furnace,refining furnace,reheating furnace,metal mixter furnace,annealing furnace, cupola furnace,electric arc furnace,induction furnace,AOD furnace,VOD furnace,etc thermal technology equipment.
Non-ferrous Metal industry:Smelting furnace,refining furnace,reverberatory furnace,converter furnace.
Building materials industry:Cement kiln,glass kiln,ceramic kiln,lime kilns,kiln car,tunnel kiln
Energy & Incineration:Coke oven,general boiler,power,generation,boiler,circulating fluidized bed boiler,electric furnace,carbon rosating furnace,waste incinerators.
Others:Petrochemical industry furnace.
Product Description:
| Light Weight Red Insulating Fireclay Brick | ||||
| Item | NG135-1.3 | NG135.1.2 | NG135-1.1 | NG130-1.0 |
| Bulk Density ( g/cm3) | ≤1.3 | ≤1.2 | ≤1.1 | ≤1.0 |
| Cold Crushing Strength (MPa) | ≥5.0 | ≥4.5 | ≥4.0 | ≥3.5 |
| Linear Change on Reheating(5h,≤2%) | ≥1350 | ≥1350 | ≥1350 | ≥1350 |
| Thermal conductivity(350±25)℃ (W/mK) | ≤0.55 | ≤0.50 | ≤0.45 | ≤0.40 |
Why choose us
Q: Are you trading company or manufacturer?
A: We are Manufacturer of refractory materials that have 4 plants in China; So we can provide you with high quality products at more competitive prices. we can provide you professional solutions about your problems. Although our salesman cannot reply you immediately, pls leave your email or phone number, we can let our technician directly help you ASAP.
Q: Do you accept OEM?
A: Sure, we can do OEM for much kind of brick.
Q: What information do we need to provide?
A: If you are clear about the products you purchased, please send us the brick drawings, index(include chemical and physical indicators )and order quantity.
If you are not familiar with it, please tell us the usage and working temperature, we will recommend the product to you.
Q: How long is delivery time?
A: The delivery time will be determined according to the quantity of the order. Our monthly output is 12000tons. We have good connection with shipping company, agency, as well as the local custom and port authority. making sure we deliver on time.
