|
[China]
Trade Verify
Address: ROOM 2005-2006, BUILDING A, DINGXIN CENTER, SILIHE ROAD, HEFEI, ANHUI,CHINA
Contact name:Dora
ANHUI DERUN IMPORT & EXPORT TRADING CO., LTD |
|
Verified Suppliers
|
|
|
Excellent Flexibility Vinyl Chloride And Vinyl Acetate Copolymers Resin 40/43 Used For UV Coating
In UV system, DR 40/43 can provide good dispersibility in
pigment,improve the flexibility
and plumpness of paint film and adhesive force of material base, lessen the procedure of
base coating, and it can reach VOC zero release and conform to the requirements of environmental protection.
Specification
| NO | ITEM | SPECIFICATION |
| 1 | Appearance | White powder |
| 2 | Whiteness | ≥ 80 |
| 3 | Composition | Vinyl chloride 60±2% |
| 4 | K value | 42 |
| 5 | Viscosity No. ml/g | 43±3 |
| 6 | Glass Transition Temp ℃ | About 58 |
| 7 | Average molecular wt | About 30000 |
| 8 | % by wt, through 60 mesh | 100% |
| 9 | Apparent density(g/ml) | 0.5min |
| 10 | Volatilization (%) | 1% max |
| 11 | Impurity particle No/100g | 20 max |
| 12 | Solubility(25% EA solution) | Colorless and transparent |
Application
1. UV varnish: solution colorless transparent, high gloss of paint film.
2. UV ink: the pigment has a good wettability, improve the pigment development.
3. UV coating: provides adhesion to the substrate (PVC, PU, paper, PC, etc.), provides
excellent flexibility and high bending resistance.
4. PTP aluminum foil heat sealing adhesive: it is used in combination with carboxyl vinyl resin
to greatly reduce heat sealing temperature (150℃ to 140℃) and improve heat sealing strength
on aluminum and PVC heat sealing.
5. All-in-one machine paper adhesive: improve the adhesion fastness to the paper.
6. Hot stamping coating: reduce the stamping temperature and provide adhesion to the substrate.
7. Carbon belt: reduce melting temperature and provide adhesion.
Solubility:
1 . In the UV system, it can be well dissolved in HDDA, TMPTA or cationic monomers to make
a resin solution of 10-40% solids, and can also dissolve part of solvents and part of monomers
to achieve a higher Solid, colorless and transparent solution.
2 . The solid content of the ester solvent is recommended to be 20% -25%, the solvent is
recommended: EA,NPAC, NBAC, etc., the solution is colorless and transparent.
3 . The solid content of ketone solvent is recommended to be 20% -30%, the solvent is
recommended: MEK, MIBK, CYC, etc., the solution is colorless and transparent.
Storage
Store in a dry and ventilated place, do not place in open-air,
avoid storage in direct sunlight and caution against wet.
Must be transported in clean vehicle with awning and keep away from moisture.
It is NOT hazardous article, and the shelf life is one year from
the production date.
Package
In kraft bag, lined with pp bags of 25kgs net, with PE inner bag.
