550MHz 1000ft Solid Unshielded Plenum CAT6 Cable 23AWG UTP CMP Bare
Copper Cat6 Cable
Quick Details :
A category 6 cable that is a standardized cable for Gigabit
Ethernet. It features stringent specification for crosstalk and
system noise for added quality. An outstanding cat 6 cable that
ensures a clean and clear transmission.
*20℃ Conductor Resistance ≤93.5Ω/km
*Ground Capacitance Unbalance ≤4% NVP 69%
*Operating temperature(℃) -20℃~+70℃
Conductor: O.F.C solid copperΦ0.55mm x 0.565mm.
Jacket: F; a, e retardant gery PVC nom O.D.6.50mm.
Coded according to ANS/TIA/EIA-568-B color code.
Specifically applicable to following systems:
All UTP Ethemet protocols of 4.8Gbps, e.g 1000 base-TX, 100
base-T2, 10 base-T.
All protocols of 4.8Gbps and UTP-based ATM.
Broad-band video (77 channels below 550MHz).
An outstanding cat6 cable that ensures a clean and clear
|0.56MM 0.57MM 0.58MM|
|Nuber Of Conductor||4P|
|Indoor / Outdoor||Single jacket/Double jacket|
|Jacket Material||PVC, ROHS PVC, LSZH PVC|
|Outer Jacket Thickness||6.2mm|
|DC Resistance(Max.)||9.5 Ohm/100m|
|DC Resistance Imbalance||2.50%|
|Insulation Resistance||10000 MOhm.km|
|Operating Temperation||-40 °C - +75 °C|
|PVC Jacket Color||As client's request.|
|Marking On Jacket||On your request (Print your brand)|
CAT 6 vs CAT 5e ?
The history of cable design for Ethernet networks resulted in two
separate efforts to improve on the previous generation Category 5
(CAT 5) cable standard. One eventually became CAT 6. The other,
called Category 5 Enhanced (CAT 5e), was standardized earlier. CAT
5e lacks some of the technical improvements that went into CAT 6,
but it supports Gigabit Ethernet installations at a lower cost.
Like CAT 6, CAT 5e utilizes a four-wire pair signaling scheme to
achieve the necessary data rates. In contrast, CAT 5 cables contain
four wire pairs but keep two of the pairs dormant.
Because it became available on the market sooner and offered "good
enough" performance for Gigabit Ethernet at a more affordable price
point, CAT 5e became a popular choice for wired Ethernet
installations. This plus the relatively slow transition of the
industry to 10 Gigabit Ethernet significantly slowed the adoption
of CAT 6.
Limitations of CAT 6
As with all other types of twisted pair EIA/TIA cabling, individual
CAT 6 cable runs are limited to a maximum recommended a length of
328 feet for their nominal connection speeds. As mentioned
previously, CAT 6 cabling supports 10 Gigabit Ethernet connections
but not at this full distance.
CAT 6 costs more than CAT 5e. Many buyers choose CAT 5e over CAT 6
for this reason, at the risk that they will need to upgrade cables
again in the future for better 10 Gigabit support.