Active Member
|
[China]
Address: nanhuan road of anping town
Contact name:angel cui
HEBEI CHANGRONG METAL PRODUCTS CO.,LIMITED |
|
|
Technical Parameter
| wire diameter | 0.5-1.2mm |
| aperture of the mesh | 12.7*12.7,25.4*25.4mm |
| width | 1219.2mm |
| length | 100m |
| transformer | 60KVA*4 |
| motor | 4.0KW |
| speed | 80-100times/min |
| voltage | 380v 50hz |
| wire diameter | 1.2-1.4mm |
| aperture of the mesh | 25.4*25.4/50.8*50.8mm |
| width | 1219.2,1524mm |
| length | 100m |
| transformer | 75KVA*5 |
| motor | 5.5KW |
| speed | 80-100times/min |
| voltage | 380v 50hz |
| wire diameter | 1.4-2.7mm |
| aperture of the mesh | 25.4*25.4,50.8*50.8mm |
| width | 1219.2,50.8*50.8mm |
| length | 100m |
| transformer | 85KVA*5 |
| motor | 5.5KW |
| speed | 80-100times/min |
| voltage | 380v 50hz |
| wire diameter | 0.7-2.0mm |
| aperture of the mesh | 12.7*12.7,25.4*25.4,50.8*50.8 |
| width | 1219.2,1525mm |
| length | 100m |
| transformer | 85KVA*7 |
| motor | 5.5KW |
| speed | 80-100times/min |
| voltage | 380v 50hz |
| wire diameter | 0.8-2.5mm |
| apertue of the mesh | 12.7*12.7,25.4*25.4,50.8*50.8 |
| width of the mesh | 1219.2,1524,2006.6mm |
| length | 100m |
| transformer | 90KVA*5 |
| motor | 5.5KW |
| speed | 80-100times/min |
| voltage | 380v 50hz |
Notes
1. This machine can weld 0.4-2.5mm ,the raw material can be blace wire , galvanized wire , stainless steel wire
2. For the wire feeding ,both longitude wire and cross wire are feed automatically from wire coils
3.The edge cutter and middle cutter can adjust freely , So you can get regular edge and 2 or 3 rolls mesh at the same time
4.You can set the mesh roll length by counter switch on the control panel
5.Both welding time and welding current is adjustble on control panel to adjust the welding degree
mesh repair machine
Mesh repairing table 
Welded wire mesh machine wire spool winding machine
bobbin stand-off
Electric control cabinet
In order to give you one accurate quotation sheet,please supply us
more of your requirements as below:
1.wire diameter range
2.mesh width
3.panel length
4.mesh opening size
5.industrial votage/frequency
We are a manufacturer of mesh welding machines in China, our
factory is located in Anping county, Hebei Province. Our main
products are:
Reinforcing mesh welding machine, fence mesh welding machine,
animal cage welding machine, steel grating welding machine, roll
mesh welding machine, wedged wire screen welding machine, wire
straightening and cutting machine etc.
