5 gallon water bottling machine is integrated washing filling and
capping together.
It is ideal 5 gallon water bottling machine to produce barrel
water.
The whole 5 gallon water bottling machine is using stainless steel
304 ,rot resistant,can be cleaned easily.
Main electric parts are all branded. Air channel system use Air TAC
brand product.
The 5 gallon water bottling machine is with compact
construction,will occupy small room,working efficiency is high.
Only need 2 operators to control, is a good choice for factory to
choose.
The 5 gallon water bottling machine set up do not need plug floor
screw,after case taking off,set the 5 gallon water bottling machine
on the flat floor,and then adjust stand height and adjust all stand
pressure to be average.
After the machine is set up well, get in through water pipe, drain
pipe and power , air power.
Working process:
gallon bottling machine can be divided into 3 steps: washing,
filling and capping, total 36 working stations,working process as
below:
1) Set empty barrel mouth to barrel seat, empty barrel will be
washed during headstand situation,4 working station for barrel
inserting.
2) Washing process will be divided into 4 steps:
1, hot alkali water washing 2,thimerosal washing; 3,clean water
washing,4,pure water washing.Every washing step is set to 8S,after
washing,there will be 10S for dripping.
3) The barrel after washing will move down 45 degree through the
passing chain and will passing out chain and turn over 45 degree by
barrel lift cylinder to filling position for filling.
4) Filling value will driven by cylinder to insert into barrel and
start to fill, filling time is controlled by PLC, and filling time
is adjustable by control panel according to filling liquid surface.
After filling, the extra water will back to pure water tank by
automatic vent,5 gallon water bottling machine can reduce water
consumption.(water tank is not included)
5) After filling process finish,the filled barrel will be pushed to
capping position by barrel stop cylinder,the whole process finish
till now.
Spare parts for free:
Sealing ring for filling valves*1suit
Recommended Spare parts list:
NO. | Items | Qty. | Price(USD) |
1 | Sealing ring for filling valves | 1suit | For free |
2 | Bucket holder | 2pcs | 6.8 |
3 | Cap pressing mould | 1pcs | 5 |
4 | Air switch | 1pcs | 17 |
5 | Contactor | 1pcs | 14 |
6 | Solenoid valve | 1pcs | 27 |
Parameters:
Cylinder | Air tech-Taiwan |
Magnetic valve | Air tech-Taiwan |
Rising pump-filling pump | Nanfang |
Motor | TWT Taiwan |
PLC | Mitsubishi Japanse |
Power | 5.3KW |
Dimension | 3400*1000*1750mm |
Weight | 500kg |