Active Member
|
[China]
Address: 4F, Building 4, GuoLe Technology Park, LiRong RD, DaLang, LongHua Dist. Shenzhen, China
Contact name:Cherry Liu
ANC International Co., Limited |
|
|
Low Loss SM MPO To MPO Truck Cable Assembly 8 Fiber Type A Or B
Polarity
Description:
Low loss SM 12 Fiber 24 Fiber MPO to MPO Truck Cable Assembly
manufactured by ANC International Co., Limited provides lower
insertion loss than standard MPO MTP cable assembly. Optical
insertion loss budgets are now one of the top concerns among data
center managers, especially in today’s 40G and 100G backbone
switch-to-switch deployments for networking and storage area
networks (SANs). Staying within the loss budget is essential for
ensuring that optical data signals can properly transmit from one
switch to another without high bit error rates and performance
degradation.
The MPO MTP low loss patch cord uses angle polished connector to
reduce back reflection and minimize the insertion loss of the fiber
connector. The cable can be 3mm round jacket or flat ribbon jacket
or bare ribbon cable; The fiber can be SM, OM3, OM4 or customized;
Features:
Low loss for multiple connection optional;
SM (9/125 G657A1), OM3, OM4, OM5 fiber optional;
With pin or without pin optional
8Fiber, 12Fiber, 24Fiber MPO MTP Connectors optional;
High density connections between network equipment in
telecommunication rooms;
Type A or Type B or Type C optional;
Easy installation and removal with push-pull latching
LSZH, OFNR, OFNP Jacket optional;
Applications:
Data Center
LAN, FTTX
CATV
Optical Performance:
| MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
| Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
| Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
| Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
| PC≧40dB | |||||
| Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
| Exchangeability | ≤0.3dB (Connector randomly) | ||||
| Tensile Strength | ≤0.3dB (Max 66N) | ||||
| Vibration | ≤0.3dB (10~55Hz) | ||||
| Operation Temperature | -40℃ ~ +75℃ | ||||
Interferemeter Test:
| MPO/MTP | Dimension MT |
| Radius of Curvature | X≧2000mm; Y≧50mm |
| Fiber Height | 1000~4000nm |
| Endface Angle | X±0.3°; Y±0.3° |
| Core Dip | -300nm ~ 300nm |
Choose Your Polarity
Type A - Straight: Straight-through polarity is typically for connecting patch
panels. They are wired in a mirrored configuration, going from Pin
1 on one connector end to Pin 1 on the opposite end, etc.
Type B - Rollover: Rollover polarity is used primarily for connecting to switches
and transceivers in 40Gb applications. In a 12-strand rollover
polarity, the cable is wired from Pin 1 on one connector end to Pin
12 on the opposite end. Then 2 to 11, and so forth.
Type C - Flipped: Pair-Flipped polarity is typically used in cassette-to-cassette
applications. Pin 1 on one end goes to Pin 2 on the opposite end,
and 2 to 1, 3 to 4, 4 to 3, and so on. you can select your desired
polarity before ordering.
Related Product Pictures
