Active Member
|
[China]
Address: 4F, Building 4, GuoLe Technology Park, LiRong RD, DaLang, LongHua Dist. Shenzhen, China
Contact name:Cherry Liu
ANC International Co., Limited |
|
|
IP67 7mm Single Mode Multimode Fiber Optic Cable For FTTA Indoor Outdoor
Description
IP67 7mm Indoor Outdoor Fiber Optic Cable manufactured by ANC International Co., Limited is used mainly for Fiber to the Antenna (FTTA). FTTA is a broadband network architecture in which optical fiber is used to connect the remote redio head (RRH) to the base station in new antennas, or retrofitted in existing ones, to replace all or part of the coax local loop. One advantage of fiber optic cable is that it is easier to install because it is lighter than coax cable; Another advantage of optical fiber is that baseband units (BBU) no longer have to be stuck to the RRH. The BBUs can be moved to wherever it is most convenient. Most importantly, FTTA is required to support low-latency, high-speed backhaul and increase traffic bandwidth. This indoor outdoor 7mm Fiber Cable has black LSZH Jacket.
Specification
Light in weight, reliable and cost-effective installation.
Available Single mode and Multimode
Fiber type: G652, G657A1, G657A2, OM3 50/125 or customized.
7.0mm O.D. Cable with duplex 2.0mm to 3.0mm jacketed sub-unit.
With or without protective black tube optional.
Out jacket: Black LSZH or customized.
Usage
Widely used in Fiber to the Antenna (FTTA) & FTTH
BBU,RRU
Automation and industrial cabling
Technical Data
Table 1. Characteristics of the Single Mode Fiber (ref. ITU-T G657A2)
| ITEMS | UNITS | SPECIFICATION |
| Attenuation | dB/km | ≤0.4 at 1310nm ≤0.3 at 1550nm |
| Chromatic Dispersion | ps/nm.km | ≤3.5 at 1285nm ~ 1330nm ≤18.0 at 1550nm |
| Zero Dispersion Wavelength | nm | 1300 ~ 1324 |
| Zero Dispersion Slope | ps/nm2.km | ≤0.095 |
| Cut-off Wavelength (λcc, 22m of a cabled fiber) | nm | ≤1260 |
| Mode Field Diameter | μm | 9.2±0.5 |
| Mode Field Concentricity | μm | ≤0.8 |
| Cladding Diameter | μm | 125±1.0 |
| Cladding Non-circularity | % | ≤1.0 |
| Coating cladding concentricity error | μm | ≤12.5 |
| Coating Diameter | μm | 245±10 |
| Bending loss (Bare fiber) Radius :7.5mm x 1 turn | dB | ≤0.5 at 1550nm |
| Proof Test | kpsi | ≥100 |
7mm Indoor Outdoor Fiber Optic Cable Characteristic
| Model | Fiber Count | OD (mm) | Weight (kg/km) | Max. Tension (N) | Max. Crushing Resistance (N/100) | ||
| Short-term | Long-term | Short-term | Long-term | ||||
| GJFJV | 2 | 6.8~7.0 | 42 | 400 | 200 | 1000 | 300 |
| GJFJV | 4 | 6.8~7.0 | 43 | 400 | 200 | 1000 | 300 |
