Ceramic Fiber Lab Acid Digestion Fume Hood Acid Resistant Explosion Proof

Acid & Alkali Resistant Lab Explosion Proof Chemical Duct Fume Hood With Corrosion Proof

1. Product Description 

A fume hood (sometimes called a fume cupboard or fume closet) is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts.

A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.

Type of Fume Hoood

Student workstations
Student workstations are generally deployed in undergraduate teaching lab
settings and are used by students while under supervision by instructor. Accordingly, materials of construction are adjusted to suit less demanding chemical resistance needs. Glass side and back windows are often provided. Often these hoods are placed on an island and are manufactured in a back-toback configuration with two working chambers.

Acid Digestion Hoods
- For operations involving heating and evaporation of acids, special materials are used in the construction of the hood interior. The principle changes include a PVC or polypropylene liner, polytetrafluoroethylene (PTFE) coated sash frame, lower airfoil and exhaust connection. In addition, if the hood will be used with hydroflouric acid, then the sash glass and light lens is changed from glass to polycarbonate.

Perchloric Acid Hoods
For operations involving heating and evaporation of perchloric acid, special fume hoods are produced. These hoods are always bench top models with the addition of a wash-down system and drain trough to remove hazardous perchlorate residues from the hood interior. Perchloric acid hoods are always connected to a dedicated exhaust system which is also equipped with a water wash system. Perchloric acid hoods can be equipped with a stainless steel liner if they will be used with perchloric acid only or a PVC liner if they will be used with other acids as well.

2. Product Parameters 

3. More About the Fume Hood 

A laboratory chemical fume hood is first and foremost a safety device. Users need to be able to rely on their fume hood as a primary containment device to protect them from the hazards within. It is connected to a remote exhaust system and provides operator protection by drawing air around the operator and into the hood chamber through the working opening.

When the sash is closed, the exhaust system continues to operate to maintain the working chamber and exhaust ducting at negative pressure and provide containment of fumes and vapors. Fume hoods are generally served by either constant air volume (CAV) or variable air volume (VAV) exhaust systems.

A typical bypass fume hood can be used on a constant volume system. This is due to an alternate path being created to allow air to enter the fume hood when the sash is closed. Automatic compensating bypass hoods can be manufactured with vertically rising sashes only. Certain types of fume hoods can't be made in an automatic compensating bypass configuration. Such cases include fume hoods that include horizontally sliding panels as well as double hung vertically rising sashes. While the velocity increase is more noticeable as the sash is closed, such hoods can be used successfully with a CAV exhaust system.

Some of the most common models of chemical fume hoods offered by manufacturers include benchtop models. Others include thin-walled benchtop models, and walk-in fume hood models. You should also ensure that the manufacturer or supplier you have chosen is a certified and reliable one, supplying only high-quality products. Specials attributes like chemical and flame resistance should also be available for the fume hoods. A chemical fume hood is a long-term investment. Thus, like any other laboratory furniture, one should always ensure that they make a well-informed decision. This is done by knowing all the facts in advance.

4. Detailed Photos

5. Fume Hood Maintenance

• Hoods should be evaluated by the user before each use to ensure adequate face velocities and the absence of excessive turbulence.

• In case of exhaust system failure while using a hood, shut off all services and accessories and lower the sash completely. Leave the area immediately.

• Fume hoods should be certified, at least annually, to ensure they are operating safely. Typical tests include face velocity measurements, smoke tests and tracer gas containment. Tracer gas containment tests are especially crucial, as studies have shown that face velocity is not a good predictor of fume hood leakage.

• Laboratory fume hoods are one of the most important used and abused hazard control devices. We should understand that the combined use of safety glasses, protective gloves, laboratory smocks, good safety practices, and laboratory fume hoods are very important elements in protecting us from a potentially hazardous exposure.

• Laboratory fume hoods only protect users when they are used properly and are working correctly. A fume hood is designed to protect the user and room occupants from exposure to vapors, aerosols, toxic materials, odorous, and other harmful substances. A secondary purpose is to serve as a protective shield when working with potentially explosive or highly reactive materials. This is accomplished by lowering the hood sash.

6. Project Cases

7. FAQ

6 Questions to Ask When Buying a Fume Hood:

-Which chemicals will you use within the hood?

-Is a ducted or ductless hood best suited to your needs and available space?

-Where will you place the fume hood in the lab? Consider workflows, access to external exhaust systems, and competing air patterns.

-What size fume hood will best suit your needs? Be sure to consider what (if any) equipment will be enclosed in the hood.

-Are any service fixtures or accessories such as airflow monitors, electrical outlets, water, or gas fixtures required?

-Are base cabinets for acid, solvent, or non-chemical storage required?