Durable Aluminum Window Or Door Frame / Aluminium Corner Profile

Aluminum Window Or Door Frame , Silver , Bronze , Champagne , Decorative

1.Cataloge

2.Production process

  Aluminum or aluminum alloy products are used as anodes in electrolyte solution, and the process of forming aluminum oxide film on the surface of the aluminum and aluminum alloy is called anodic oxidation treatment of aluminum and aluminum alloy. After anodization, the surface of aluminum can produce several microns - hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decoration have been obviously improved and improved.

  The aluminum oxide film is a porous membrane. Whether it is coloured or not, it must be closed before being put into use, so as to improve its corrosion resistance and weatherability. There are three kinds of treatment methods, namely, high temperature hydration reaction closed, inorganic salt closure and organic matter closure.

(1) High temperature water sealing.

This method utilizes the hydration reaction of aluminum oxide film and water to turn the amorphous membrane into a hydrated crystalline membrane.

The hydration reaction can be carried out at both normal and high temperatures, but at high temperatures, especially at the boiling point, the hydrated crystalline membrane is a very stable and irreversible crystalline film. Therefore, the most commonly used aluminum oxide film is treated by boiling water or steam treatment.

(2) Sealing of inorganic salts.

Inorganic salt method can improve the fastness of organic coloring dyes, so it is often used in chemical coloring.

(3) Organic sealing method.

This is the soaking, soaking or coating of the aluminum oxide film. Because of the high cost and the increase of the process flow, it is not easy to use, more or more of the two kinds of methods mentioned above, and the first kind of high temperature hydration is the mainstream.

3.Introduction