6063 T5 Aluminum Kitchen Cabinet Frame Length Customized Corrosion Resistance

aluminum kitchen cabinet frame 6063 T5 , Kitchen equipment

Product Description

The characteristics of the aluminum alloy doors and Windows of insulated bridge

Bridge aluminium alloy door window more suitable for high-grade use window, because of its certain characteristic:

(1): the broken bridge aluminum alloy doors and Windows color composition is combined with the wood of the environmental protection, prison. Steel window secure, the generality of the thermal insulation of window of model steel door is made up of two different sections by article energy-saving insulation, energy-saving insulation article article also called nylon, it in the middle of a heat transfer is the main purpose of disconnect and prevent cold heat transmit fast or slow heat transfer function. Its structure is more complex than ordinary aluminum doors and Windows, the cost is higher, the ordinary color aluminum does not have insulation bar, not heat preservation and energy saving is only on the surface of the paste processing.

(2): the profile of the section of the bridge of the bridge is strictly followed by the national standards. The wall thickness requirement must be above 1.4 mm, because the wall thickness relation to assemble the technology and the strong safety problem that make up door window. And ordinary colour aluminium door and window wall thickness requirement is not very strict, general according to market and processing door and window field interest is fixed, average is about 1.0 mm.

(3): the broken bridge color aluminum doors and Windows and ordinary color aluminum doors and Windows assembly technology requirements features: broken bridge color aluminum Windows and doors is through the 1.4 mm or 1.4 mm above the wall thickness of cut in 45 degree Angle, corner with more than 3 mm, dedicated plug-in through the doors and Windows assembly equipment. Extrude position, while normal window and door is the common Angle aluminium that USES 1mm to be used pull riveted to connect and become, its strong safety degree is poor, but cost is low. And there is no problem standing in the top of a well-assembled colored bridge window and window. The technology required to assemble the complete set of equipment and assemble it manually is far from technically required. The special bridge aluminum profile and ordinary aluminum profile are not comparable.

(4): broken bridge color aluminum doors and Windows must be made by aluminum factory specializing in the production cycle and its surface color processing professional technology, service life is permanent, and ordinary color aluminum doors and Windows just by any ordinary aluminum, without professional finishing one color, I want no aluminum manufacturers in place of professional technology processing, coating effect and use fixed number of year is not too good, too long will appear fade phenomenon, fade said kraft glands, which determines the middle-east color aluminum doors and Windows is the production cycle is long, and the characteristics of ordinary color aluminum doors and Windows production cycle is short.

(5): color aluminum doors and Windows in middle-east and ordinary aluminum door and window design is not the same, the broken bridge design pattern atmosphere. Daylighting is connected fully, according to different space design, daylighting and ordinary aluminum doors and Windows can only according to the conventional design appear a poor, broken bridge open window design, design special middle-east casement Windows hardware, while at the aluminum is applicable to any kind of hardware, beautiful is poor.

(6): the bridge window glass must be the hollow glass 5mm + 9A + 5mm double steel, and the normal color aluminum is usually single house glass, so the bridge insulation effect is good.