Guangdong KLUK Aluminum Building Technology Co., Ltd |
Verified Suppliers
|
|
Introduction of Sliding Windows:
The advantages of RHD135 Series Sliding Window are simple, beautiful, large window width, large glass area, wide field of vision, and high lighting efficiency. Commercial aluminum sliding window is easy to clean, flexible, safe and reliable.Modern aluminium sliding system has a long service life, opens in a plane, takes up less space, and is convenient to install gauze. #90/138 Series Sliding Window adopts high-precision profiles, the profile thickness is 1.4mm, and it is equipped with 5+19A+5 double-layer tempered glass, which can be matched with lattice strips and craft glass. The design of the sliding system does not take up space, and the design of the sliding wide rail is conducive to the stability of load-bearing and window sashes.
Modern aluminium sliding system adopts the sliding track on the window frame with the window sash equipped with pulleys. The advantage of thiscommercial aluminum sliding window is that the window does not occupy additional space regardless of the opening and closing state, and the structure is relatively simple. #90/138 Series Sliding Window is generally most suitable for high-rise buildings with more than two floors. Because the opening method is a sliding way, commercial aluminum sliding window will not be outside like a casement window. To avoid falling objects from the window, modern aluminium sliding system are most suitable for high-rise buildings.
Fixed Part:
Fixed windows are fixed to the wall without any closing or opening operation. In general, they are provided to transmit the light into the room. Fully glazed shutters are fixed to the window frame. This type of window is used in situations where light or vision alone is needed as no ventilation is possible through fixed window.Round Sliding Windows.Aluminium Round Top Sliding Windows
In the process of using the push and pull window, there are
disadvantages and advantages, but the relative advantages are
larger than the disadvantages, so the use range is relatively wide.
Generally, windows must have wind pressure resistance, that is to
say, they can resist the general wind, and there is a certain
degree of tightness. Otherwise, when it rains outside, it will rain
in. Another is that the windows should be air tight, and the indoor
temperature can be protected or the insulation effect can be
achieved when it is needed. Push and pull windows are similar to
other price windows, and push and pull windows are easy to use, so
the market scope is much more than other windows.Round Sliding
Windows
Performance | Parameter | National Standard |
Wind Load Resistance | 4.5<=p3>=5.0 | level 9 |
Air Tightness | 2.5<=q1<=2.0 | level 7 |
Water Tightness | 350<=△p>=700 | level 6 |
Thermal Insulation | 3.5>k>=3.0 | level 5 |
Sound Insulation | 20=<Rw+Ctr<25 | level 3 |
|
Glass Specification:
Single-Pane Glass: Simple and Cost Efficient
Due to lower costs, single-pane windows are great for garages,
tool-sheds, and other non-heated outbuildings. Also, when
single-pane windows get broken, they are less expensive to repair
as you only need one pane of glass. If energy efficiency is a
concern, dual- or triple-pane glass options are a wiser choice.
Dual-Pane Glass: The New Standard
Double glazing consists of two glass panes which are joined
together usually through an aluminium spacer or a warm-edge spacer
(polyamide profile) and sealed around with a special glue. They
offer significantly higher thermal insulation and sound insulation
compared to single glazing in which only one glass pane is applied.
Products Sketches: