KTD120 Three rail sliding door
•Unique and extreme line (can be gilt edged) structural design,
open and fixed, indoor and outdoor appearance unified, minimalist,
high-end, with high-cost performance.
• Professional corner code connected with reasonable glue injection
process, no lack of glue and no excess, improve the strength, water
tightness and air tightness of the corner; Provide the humanized
choice of collision Angle group Angle and field Angle group Angle
code.
• Professional transom injection rubber connector, enhance the
transom resistance to wind pressure, air tightness and water
tightness.
• Unique and reasonable drainage channel makes the experiencer rest
at ease.
• Professional waterproof and drainage design on the outdoor side
of the bilateral withholding line to solve the common problems in
the industry.
• Optional installation of protective frame;
• Standard 5mm+12A+5mm insulating glass.
• Form a system of sharing sub-parts with KPD115 and KPD135.
Surface:
1. The principle of electrophoresis technology
The electrophoresis is basically the same as the traditional light
and transparent electrophoresis. The anode electrophoresis is
carried out under the action of direct current. With the action of
the electric field, the coated particles with charge are moved to
the coated workpiece, which precipitates the electrophoresis
coating deposited on the surface of the aluminium profile, forming
a layer of film. The difference lies in the different types of
coatings and the slightly different devices.
The electrophoretic coating includes acrylic resin, melamine resin,
pigments, solvents, neutralizing agents, additives and other
ingredients. Through the application of thermal fixing in the
viaduct layer in the particle, the shape of the micro-concave
coating during the process of baking was basically unchanged in the
baking process, and the appearance of the film was formed
uniformly. The degree of extinction can be adjusted by the ratio of
high gloss paint and low gloss paint.
For profile color, due to the transparency of coating, the color of
the product depends on the electrolytic coloring. The color of the
profile can also be added to color, white, ivory, green, red, ash,
etc., by selecting the color aluminum profile required by adding
color pulp. The surface quality is better than spray.
2. Excellent performance of products
high transparency and full measure, with special gloss and
transparency, the coating has a high stereo effect, and the color
of the substrate is obvious.
the high hardness, when the temperature of 180 ℃ baking 30 min,
hardness can be up to 4 to 5 h.
good level of flow, strong paint film, and smooth film.
with strong binding force and penetration, the coating is
all-pervasive, and the wet film and dry film have a strong binding
force.
the performance is good, resistance to discoloration and corrosion
when the baking temperature of 180 ℃ ~ 200 ℃ workpiece does not
change color, lasting bright color products, corrosion effect is
perfect.
the aver
Colors
Accessories
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium doors?
2. If you have the estrusion drawing, send us and we develop the
correspondence mold.
3. Which color you want or tell us the architectural style you
like.
4. Purchase quantity. It will convenient us to give you the best
price.
