Clear Tempered Glazed Awning Aluminum Window , Anodising Swing Open Window

Top Swing Hanging Windows:

Swing Hanging window refers to the hinge mounted on the upper side of the window, which opens inward or outward. Hanging window is a kind of aluminum alloy and plastic steel window that appeared later. It is a new form developed on the basis of casement windows. It can be opened in two ways, either horizontally or from the top. When the casement window is closed, pull the upper part of the window inward to open a gap of about 10 cm, that is to say, the window can be opened a little from the top, the open part is suspended in the air, and is connected and fixed with the window frame through hinges, so it is called hanging type. It has the advantages of both ventilation and safety. Because of the hinge, the window can only be opened 10 cm, and the hand can not reach in from the outside. It is especially suitable for use when there is no one at home. Recently, this kind of function has not only been limited to the flat window, but also the sliding window can be suspended to open.

The layout of windows should pay attention to the following points:
(1) When the windowsill height is less than 800mm (residential building windowsill height is less than 900mm), there must be protective facilities when there is no balcony or platform outside the window.
(2) Waterproof measures should be taken for the outer window sill, and the gaps between the window frame and the window sash, and between the window sash and the window sash should be handled well. Meanwhile, the inner sill should be 15mm higher than the outer sill.
(3) The opening form of windows should be convenient to use, safe and easy to clean. The windows on the ground floor shall be provided with protective measures, and the bottom height of the window sash opening to the public corridor shall not be less than 2m.

Door Frame:

The main process is as follows

(1) Ingredients: according to the specific alloy grades, calculate the amount of various alloy components, and reasonably mix with various raw materials.

(2) Smelting: the prepared raw materials are added into the smelting furnace for melting according to the process requirements, and the impurities and gas in the melt are effectively removed by degassing and refining.

(3) Casting: under certain casting conditions, molten aluminum is cooled and cast into round casting rods of various specifications through deep well casting system.

2. Extrusion:

Extrusion is a means of profile forming. First, according to the section of the profile product, the mold is designed and manufactured, and the heated round casting bar is extruded from the mold by the extruder. For 6063 alloy, an air cooling quenching process and an artificial aging process are used to complete the heat treatment. Different brands of heat treatable strengthening alloys have different heat treatment systems.

3. Coloring (here we mainly talk about the process of oxidation)

Oxidation: the surface corrosion resistance of extruded aluminum alloy profile is not strong, so anodizing is necessary to improve the corrosion resistance, wear resistance and appearance of aluminum profile. Almost all the High Bay aluminum profiles produced by Janger High Bay aluminum profile factory are oxidized.

Commonly known as: everted window. In the national standard GB / T 5823-2008 terminology for building doors and windows, Part 4. 3. Six articles clearly define "Top hung casement opening outward": the hinge is installed on the upper side of the window and opens outward. The overhanging window is a kind of overhanging window, which belongs to casement like other overhanging windows. Since this standard does not mention the inner hanging window, the upper hanging window usually refers to the outer hanging window by default.Aluminium Top Awning Swing Windows

1. Ventilation: because the inside inverted position is another way to open the casement window, it makes the room naturally circulate with the natural air, makes the indoor air fresh, and eliminates the possibility of rainwater entering the room. The fresh air undoubtedly creates a comfortable living environment for people.Aluminium Top Awning Swing Windows
2. Safety: the linkage hardware and handle arranged around the window sash have various functions for indoor operation. When the window sash is closed, all sides of the window sash are fixed on the window frame, so the safety and anti-theft performance are excellent.
3. Easy to clean windows: easy to operate, can make the outside of the window sash to indoor. It is convenient and safe to clean the outer surface of the window.
4. Practicability: the utility model can avoid occupying the indoor space when the inner window is opened, and is inconvenient to hang the curtain and install the lifting clothes hanging rod.
5. Good sealing and thermal insulation performance: through multi-point locking around the window sash, the sealing and thermal insulation effect of doors and windows is ensured.