3.0mm Deep Drawn Metal Stamping

0.3-3.0mm Galvanized Deep Drawing Metal Stamping

Deep drawing metal stamping

Deep-drawing stamping is a metal stamping process used to form various hollow axisymmetric components from metal plates. This form of metal stamping involves applying a punching force to the metal plate so that it is drawn into the cavity in the radial direction. First, the metal plate is placed on the forming mold. The sheet is fixed in place at the end by the pressure applied by the blank holder. Then, an axial force is applied to the metal plate by a mechanical punching tool, deforming the workpiece and flowing into the mold cavity to produce the desired shape.

Deep-drawn metal stamping parts have the following advantages:

1. One-piece molding, no seams or welds, beautiful appearance

2. Use raw materials economically and reduce scrap rate

3. No high mold cost

4. Strict tolerances

5. Consistent part quality

6. Economical and suitable for mass stamping, and can be used for progressive stamping.

Deep drawing metal stamping parameters

We are able to produce various deep-drawn metal stamping parts, such as stainless steel (SUS304, SUS316), aluminum, brass, copper, iron and other cold rolled steel alloys. Our deep-drawn parts are widely used in cans, lids, connectors, cups, eyelets, shells, shells, hose joints, etc.

Below is some questions you may want to know:

Questions: How to know the chemical composition of stainless steel deep drawing parts according to our requirements?

Answers: When we offer samples or batch parts, we will also send you our material list from our material factory, it shows more detailed.

Questions: How to guarantee your final size can meet our drawing request?

Answers: we will make moulds according to your 3D drawing. And we also do sampling when batch production start, to make assure the final dimension can meet your request.

Questions: How to make sure the color after painting or powder coating can be correct?

Answers: We have color card with different color number, such as RAL9016, we will contrast the sample surface and color card, to make sure the final surface effect is correct.

Questions: Generally, how do you packing the goods?

Answers: normally, for inner package: the goods is nude, for outer package: carton + plywood. If you have special request for inner or outer package, pls indicate it when you send us new inquiry.

Questions: If we find the defect products exist in the batch parts, how to do?

Answers: Yes,your caution is very good, in fact, when batch production, we need do sampling. Before shipment, we also do testing to make sure the quality is ok. If you found several defect product exists, pls take photos and send your quality feedback, we will check and send you quality products. But pls be assured that our products is qualified, unless caused by the worker's mistake to place.