|
[China]
Trade Verify
Address: 4-510, 33 BUILDING, NO.6 HOUTIAN ROAD HIGH-TECH DEVELOPMENT DISTRICT,LUOYANG AREA OF CHINA(HENAN)PILOT FREE TRADE ZONE
Contact name:vivihe
LUOYANG SUPER FOLIAGE IMPORT&EXPORT TRADE CO,LTD |
|
Verified Suppliers
|
|
|
CK45 SAE1045 S45C Chrome Plated Rod For Oil Cylinders
Chrome Plated Rod Introduction
The standard chrome-plated rod (piston rod) is made of selected high-quality 45# steel, which is processed by rough material, peeling or cold drawing, rough calibration, fine calibration, high-precision centerless grinder, electroplating, polishing and highly professional technology. Excellent can eliminate the shortcomings of oil leakage and air leakage. The standard chrome-plated rod (piston rod) is ready for use, which is convenient and quick. The products can be directly used in cylinders, cylinders, shock absorbers, piston rods, guide rods, and guide posts. If customers need special materials and specifications, they can be customized, and they can also be processed according to customer drawings.
Chrome Plated Rod Usage:
Products are widely used in rubber and plastic machinery such as
oil cylinders, cylinders, injection molding machines, blow molding
machines, die-casting machines, air hydraulic machinery,
engineering machinery, packaging and printing machinery, food
machinery, medical machinery, light source machinery, textile
machinery and other automation equipment.
Chrome Plated Rod Parameters
Model | CK45 SAE1045 S45C Chrome Plated Rod For Oil Cylinders | ||
Diameter | Metric
Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm Inch
Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm | ||
Length | Full Length 6000mm, it can be cut off according to customer
requirement. | ||
Quality | ISO9001:2008 standard | ||
Material | CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless
Steel | ||
Surface finish | Hard Chrome / None Chrome | ||
Plating Thickness | 10um ~ 20um in radius. | ||
Heat treated | Not Hardened / Induction Hardened | ||
Hardness | HRC:58-62 | ||
Hardness Depth | 0.8-3.0mm | ||
Precision | g6, h6, h7 or according to your requirement. | ||
Roughness | Less than 1.5μm | ||
Straightness | Less than 1.5μm of 100mm (Rmax) | ||
Roundness | Less than 3.0μm (Rmax) | ||
Performance | Long life and low noise | ||
Custom-made | End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled
Holes, Key Groove, Set Screw Grooved, and so on. | ||
technical standard:
Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized
according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303,
SUS316, etc.
Details
