|
[China]
Trade Verify
Address: No.1505,Chengyang Road,Zhouzhuang Town,Jiangyin City,Jiangsu,China
Contact name:Lu
KALU INDUSTRY |
|
Verified Suppliers
|
|
|
Green Anodized Aluminium Window Profiles High Weather Resistant 0.2-10 mm Thickness
XINYU-ALUMINUM
We have five branches at China and we just succeeded in acquiring SAPA(Jiangyin) Co., ltd on 30th July 2015.Our customer includ BMW,LAND ROVER,,Trina Solar and so on
Succeeding in acquiring SAPA(Jiangyin)
Xinyu Aluminum succeeded in acquiring SAPA(Jiangyin) Co., ltd
on 30th July 2015.
Sapa is the world leader in aluminium solutions. Sapa(Jiangyin)
Co., ltd was established on 2011 which is
the wholly-owned subsidiaries of sapa group.
The acquisition is part of the overall strategy. Xinyu Aluminum
will not only manufacture architectural profile but also
industrial profile which will make us be the leader of
aluminum profile.
1). Aluminium profiles for architecture
a). Aluminium profile for door and window
b). Aluminium profilet for curtain wall
c). Aluminium profiles for louver / shutter
d). Aluminium profile for handrail and barrier
e). Aluminium profile for decorations,
f). Aluminum profile with thermal barrier strip,
g). Aluminium tube, square pipes and “U”/ “I”/”L” profile
h). Aluminium sheet for roof tile, ceiling, curtain wall etc.
i). Other custom design aluminium products.
2). Aluminium profiles for industry
a). Heat sink for lighting, speaker, & other electrical equipment.
b). Furniture parts, ladder, mounting bracket/frame for bike etc.
c). The other custom desing aluminium extrusion products.
CHEMICAL COMPOSITION:
Aluminium Alloy Chemical Composition | ||||
Alloy | 6063 (%) | 6063A (%) | 6061 (%) | 6082 (%) |
Si | 0.2~0.60 | 0.3~0.60 | 0.4~0.80 | 0.7~1.30 |
Fe | 0.35 | 0.15~0.35 | 0.70 | 0.50 |
Cu | 0.10 | 0.10 | 0.15~0.40 | 0.10 |
Mn | 0.10 | 0.15 | 0.15 | 0.40~1.0 |
Mg | 0.45~0.90 | 0.60~0.90 | 0.80~1.20 | 0.6~1.20 |
Cr | 0.10 | 0.05 | 0.04~0.35 | 0.25 |
Zn | 0.10 | 0.15 | 0.25 | 0.20 |
Ti | 0.10 | 0.10 | 0.15 | 0.10 |
Other (each) | 0.05 | 0.05 | 0.05 | 0.50 |
Other (total) | 0.15 | 0.15 | 0.15 | 0.15 |
Al | Remainder | Remainder | Remainder | Remainder |
ANODIZED GRADE:
Class | Min Average Film Thickness | Min Part Film Thickness |
AA10 | 10 | 8 |
AA15 | 15 | 12 |
AA20 | 20 | 16 |
AA25 | 25 | 20 |
PRODUCT FEATURE:
Material | A6063 T5 |
Characteristics of mechanics | 1, Tensile strength: ≥ 205 N/mm2 |
2, Yield strength: ≥ 110 Mpa | |
3, Hardness(HW): ≥ 8 | |
Appearance | 1, No obvious Crack, Scratch , Peeling, Corrosion and air bubble |
2, Hang mark is accepted at two end of the profiles, but should less than 10mm | |
Application | 1, Architecture: Windows and Doors, Curtain Walls, Shutter, Louver, Barrier, Fence, Ceiling, Handrail, balustrades, showcase, Partition |
2, Industrial: tube, pipe, LED strip, heat-sink, motor housing, fins, tent, solar, Vehicle beam, TV Frame | |
3, Furniture: Chair, Wardrobe, Cabinet, Ladder, Closet, Tile Trim | |
Products Feature | 1, Environmentally Friendly, Elegant appearance |
2, Corrosion-Resistant, Abrasion Resistant, High Weather Resistant | |
3, Air-Proof, Water-Proof, Anti-Aging, Durable, Shining |
MORE PRODUCTS:
PACKAGE:
Inside: | EP shrink film to protect each pc |
Outside: | A. Waterproof craft paper |
B. Carton | |
C. Wooden pallet | |
D. As customer’s request |
FAQ:
1. Q: what’s your MOQ ? |
R: 3 metric ton for each model |
2. Q: What’s your payment term? |
R: 30%deposit,70%against the B/L copy or L/C at sight |
3.Q: Can you provide samples? |
R: Yes, we can send you samples according to you needs. |
4. Q: Can you do OEM, how about the mould cost? |
R: OEM is welcomed. The mould cost varies from USD200 to USD500 per set, we don’t charge any fee if your order qty is more than 5 tons (10 tons for curtain wall and industry profiles) |
5. Q: Do the price of all the colors are the same with the same surface treatment? |
R: Not yet, for powder coating ,the bright-colored will cost higher than white or gray; |
For Anodizing, colorful will higher than silver, black higher than colorful. |
